field_job_employment_type

job_industry

field_job_occupational_field_parents_all

field_job_experience

job_organization_name

Primary Purpose of Job Under the direction of an Engineering Lead, this position is responsible for effecting workable solutions to engineering and production problems and solving those problems rapidly and with minimum operational interference. The incumbent communicates continually with all levels of personnel in the Maintenance, Planning, Production, Purchasing, Human Resources, Finance, and EHS Departments, as well as with Technical Supervisors and other Engineering &amp; Design Department personnel. Externally, they communicate with contractors, vendors, and suppliers. Accountability Objectives Responsibilities include but are not limited to: <ul><li>Providing electrical engineering support for systems and equipment in assigned area.</li><li>Developing, recommending, and implementing migration paths for obsolete controls and components.&nbsp;</li><li>Providing compliance oversight and directing planned maintenance activities for plant power distribution systems.</li><li>Planning, scheduling, and coordinating equipment installations.</li><li>Providing engineering and consultation services in terms of diagnosis and solutions to difficult operating and maintenance problems including performing root cause analysis with the goal of increasing OEE.&nbsp;</li><li>Mentoring less experienced engineers, electrical technicians, maintenance supervisors, and craft personnel.</li><li>Providing specialized technical expertise in the application and use of new technologies for plant facilities and processes.</li><li>Participating in the development of long-range process and facilities planning, capital expenditure, and cost savings programs.</li><li>Driving continuous improvement activities to eliminate all waste, especially as it relates to equipment downtime, safety, work practices, and employee involvement.&nbsp;</li><li>Performing and/or directing the design, development, installation, cost control, and evaluation of complex engineering projects.&nbsp;</li><li>Writing and/or approving engineering specifications, designs, estimates, schedules, spare parts lists, request for quotations, requisitions, work orders, etc.</li><li>Developing, preparing, and presenting RFAs to upper management to secure capital approval for select capital engineering projects. Monitoring and managing these capital projects’ financial changes against the approved financial budget to avoid exceeding the authorized amount and expected timeline. Preparing documentation, such as engineering and project status reports, as required.&nbsp; Carry these capital projects from their beginning through completion.&nbsp;</li><li>Performing other duties as assigned. &nbsp;</li></ul> Basic Qualifications For this position to be successful, the incumbent should have: <ul><li>A Bachelor’s degree in Electrical Engineering or Electrical Engineering Technology.&nbsp;</li><li>Minimum five (5) years of experience as an electrical engineer in a manufacturing environment.</li><li>Minimum five (5) years of experience working with PLCs and HMI packages.</li><li>This position is subject to the International Traffic in Arms Regulations (ITAR), which requires U.S. person status. ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. ‘Green Card Holder’), Political Asylee, or Refugee.&nbsp;</li></ul> Preferred Qualifications For this position to be successful, preference is given to candidates with: <ul><li>Experience with Allen Bradley PLCs and HMIs.</li><li>Experience managing and executing capital projects.</li><li>Previous experience with combustion systems or furnace operation.</li><li>Previous experience with power distribution systems (up to 15kV)</li><li>A high degree of interpersonal skills to motivate and influence others, including those not under their direct supervision.</li><li>15 years of experience as an Electrical Engineer in a heavy manufacturing environment</li></ul> Working Conditions This position involves moderate exposure to risk of accident and requires following basic safety precautions. Work is normally performed in an interior work environment, while regularly accessing plant equipment for assessment. While not exposed to hazardous materials, this position requires wearing full PPE to protect from mobile equipment and hot materials when on the shop floor. This position also requires a willingness to maintain a flexible work schedule and travel (typically 10% or less) both domestically and internationally, as requested. About Howmet Aerospace Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $6.6 billion in revenue in 2023, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2023 Environmental Social and Governance report at&nbsp;<a>www.howmet.com/esg-report</a>. Follow: <a>LinkedIn</a>, <a>Twitter</a>, <a>Instagram</a>, <a>Facebook</a>, and <a>YouTube</a>. Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Howmet Aerospace

Electrical Engineer

Howmet Aerospace, headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. The Company’s primary businesses focus on jet engine components, aerospace fastening systems and titanium structural parts necessary for mission-critical performance and efficiency in aerospace and defense applications, as well as forged wheels for commercial transportation. Howmet Aerospace is transforming the next phase of more fuel-efficient, quieter aerospace engines and sustainable ground transportation. For more information, visit&nbsp;<a>www.howmet.com</a>. Follow @howmet:&nbsp;Twitter,&nbsp;Instagram,&nbsp;Facebook,&nbsp;LinkedIn&nbsp;and&nbsp;YouTube. Howmet Aerospace is transforming the next phase of more fuel-efficient, quieter aerospace engines and sustainable ground transportation. For more information, visit&nbsp;<a>www.howmet.com</a>. Follow @howmet:&nbsp;Twitter,&nbsp;Instagram,&nbsp;Facebook,&nbsp;LinkedIn&nbsp;and&nbsp;YouTube. Job Summary This position supports manufacturing by providing focused projects that will improve throughput, reduce inventory and reduce operating expense.&nbsp; Drives reduced labor costs through cellular manufacturing and new/improved methods and equipment. Responsibilities include: <ul><li>Follow Howmet’s Safety Regulations and work Rules Handbook along with all department specific safety requirements.</li><li>Applies standard practices and techniques, adjust and correlate data recognize discrepancies in results and take corrective action.</li><li>Document work and prepare&nbsp;</li></ul> Equipment &amp; Fixturing <ul><li>Designs and implements TPM and preventative maintenance programs.</li><li>Ensures safe design and operation of all tools and equipment used by manufacturing.</li><li>Selects best techniques and tools for manufacturing operations after researching options.</li><li>Provides cost justification for equipment fixtures and tooling by selecting appropriate techniques and tooling.</li><li>Trains operators on the proper use of new equipment and fixtures.</li><li>Interacts with vendors to design and develop specifications for equipment.</li></ul> Manufacturing Methods <ul><li>Analyzes and improves work practice methods, ergonomics and material handling to eliminate waste and improve work efficiency.</li><li>Provides input into plant layout or acts independently to improve workflow.</li><li>Utilizes continuous various improvement methodologies including, 6 Sigma, SPC, IPC, COP and step-down plans.</li></ul> Communications <ul><li>Make presentations on various topics including cost presentations, continuous improvement and manufacturing operations.</li><li>Prepares and communicates various engineering documents.</li><li>Acts as liaison with part number engineers, supervision and operators.</li><li>Prepares technical reports.</li></ul> Internal Customer Support <ul><li>Provides manufacturing support for part number engineers.</li><li>Provides information, data analysis to and takes action items from QSIs.</li><li>Must comply with all company attendance policies and guidelines; this includes, but is not limited to, regular attendance and occasional overtime.</li><li>Other duties as assigned.</li></ul> Skills and Abilities <ul><li>Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.&nbsp; Ability to write reports, business correspondence, and procedure manuals.&nbsp;Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.&nbsp;</li><li>Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.&nbsp; Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.</li><li>Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.</li></ul> Basic Qualifications: Education: <ul><li>Bachelor's degree in Engineering from an accredited institution.</li><li>Employees must be legally authorized to work in the United States.&nbsp; Visa sponsorship is not available for this position.</li><li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.</li></ul> Preferred Qualifications <ul><li>5 years related experience and/or training; or equivalent combination of education and experience.</li></ul> About Howmet Aerospace Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $6.6 billion in revenue in 2023, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2023 Environmental Social and Governance report at&nbsp;<a>www.howmet.com/esg-report</a>. Follow: <a>LinkedIn</a>, <a>Twitter</a>, <a>Instagram</a>, <a>Facebook</a>, and <a>YouTube</a>. Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Manufacturing Engineer - IGT

<h4>New Grad - Software Engineer</h4>Time type: full timePosted on: September 19, 2024Job requisition id: R4037What we needWe want to learn from you! Our teams at Symbotic value the early career talent that helps us solve critical issues in creative and innovative ways. That is why we are seeking a new grad from an accredited University for this opportunity. By joining Symbotic, New Grads will get to be a part of an established team to help work on solutions and problem solve on real projects. New grads will be exposed to extensive training and mentorship from our leaders while being encouraged to leverage their unique ideas and perspective.&nbsp;Interested in starting your career with a leader in supply chain robotics? Continue reading to learn more about this unique opportunity!What you'll do<ul><li>Develop real-time distributed software to deliver stable and scalable integrations with customer applications and world-class third-party warehouse management system (WMS) applications.</li><li>Develop and enhance both external (customer-facing) and internal (Symbotic component) APIs that utilizing the following technologies:&nbsp; C#, .NET, XML, JSON, RabbitMQ, SQL, and Angular.</li><li>Identify improvements for the customer experience by understanding end user’s needs and customer application workflows in a fast-paced warehouse environment.</li><li>Play a hands-on role as part of an engineering team that works to design, develop, review and test new functionality.</li><li>Collaborate with customer designs &amp; software department management who consistently communicate with end users to understand their needs.</li><li>Collaborate with other development teams and business analysts to breakdown requirements, design solutions and execute on new business requirements.</li></ul>What you'll need<ul><li>Bachelor's (or higher) Degree in Computer Science, Computer Engineering, a related technical discipline, or related experience.</li><li>Familiarity with integration protocols and software development principles.</li><li>Experience with Messaging/MQTT, SFTP, HTTPS, SOAP, REST, XML, JSON, C#, AsyncAPI, OpenAPI</li><li>Passion for delivering value through stability and scalability on one hand and through new customer-facing features on the other.</li><li>Object oriented design and programming concepts, C# or Java is preferred.</li><li>Source code version control, unit testing, design and defect tracking tools.</li><li>Self-motivated, with an ability to learn quickly and independently, and work in a dynamic agile environment with cross functional and remote teams.</li><li>Excellent verbal and written communications skills.</li><li>Prior use of cloud-hosted environments (AWS, Azure, GCP) is preferred.</li><li>Experience in the supply chain, logistics, and/or warehousing sectors is preferred.</li></ul>Our Environment<ul><li>Up to 10% of travel may be required. Employees must have a valid driver’s license and the ability to drive and/or fly to client and other customer locations.</li><li>The employee is responsible for owning a credit card and managing expenses personally to be reimbursed on a bi-weekly basis.</li></ul>#LI-JH1#LI-Onsite Apply Now

Symbotic

New Grad - Software Engineer

ABOUT ROCKET LABRocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. &nbsp;Join our pioneering team and launch your career to new heights!NEUTRONNeutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab’s proven execution history with the Electron program. If you’re interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity!ADDITIVE MANUFACTURING ENGINEER II-&nbsp; HYBRID (CNC/DED)Based at Rocket Lab's headquarters in Long Beach, California the Additive Manufacturing Engineer II is responsible for supporting the development of various Additive technologies (DED, Hybrid Solutions focused with exposure to L-PBF) with various alloys. This role will support all Additive processes involved with the Rutherford &amp; Archimedes engines. You will support the Additive Manufacturing production and development organization, with deliverables required for internal leadership, board of directors, and investors.WHAT YOU’LL GET TO DO:Process Development:<ul><li>Develop printing parameters for various metallic alloys using a variety of printing methods (Mainly DED focused, with exposure to L-PBF).</li><li>Create new and improve existing print programs.</li><li>Provide engineering support for the day to day Additive Manufacturing operations.</li><li>Work closely with downstream support functions to ensure print geometries are can be effectively post processed.</li></ul>Design for Additive Manufacturing:<ul><li>Ability to provide critical feedback during the DfAM process.</li><li>Work closely with Design &amp; Manufacturing Engineers to design for specific types of Additive Manufacturing. Effectively communicate why specific aspects of DfAM are necessary.</li></ul>YOU’LL BRING THESE QUALIFICATIONS:<ul><li>Bachelor’s Degree in mechanical, aerospace, manufacturing engineering, or equivalent.</li><li>5+ years of professional experience with metal Additive Manufacturing on DED systems.</li><li>Firm understanding of DfAM fundamentals.</li><li>Experience modeling in Siemens NX or SolidWorks.</li><li>5-Axis CAM Experience.</li></ul>THESE QUALIFICATIONS WOULD BE NICE TO HAVE:<ul><li>CNC Machining and programming experience.</li><li>Experience with LPBF Additive Manufacturing of metallic materials</li><li>Master’s Degree in Material Science, Additive Manufacturing or equivalent.</li><li>Proficient in Additive focused software such as Materialise Magics or 3DXpert / Amphion Suite</li><li>8+ years experience in Additive Manufacturing process development.</li><li>Strong Additive simulation experience</li><li>Ability to create and deliver accurate and concise presentations for design, manufacturing, and quality.</li><li>Capable of solving complex problems with little to no supervision in a timely manner.</li><li>A strong work ethic and capable of performing under pressure</li><li>Strong ability to provide and clearly articulate technical direction</li></ul>ADDITIONAL REQUIREMENTS:&nbsp;<ul><li>Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus.&nbsp;&nbsp;&nbsp;</li><li>Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing.&nbsp;&nbsp;</li><li>Must be physically able to commute to buildings&nbsp;</li><li>Occasional exposure to dust, fumes and moderate levels of noise.&nbsp;</li><li>Availability to work long hours and weekends as needed based on test and launch schedules.&nbsp;</li></ul>Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.Base salary is just one component of our total rewards package at Rocket Lab.&nbsp; Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO &amp; a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, childcare concierge, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company’s discretion.Base Pay Range (CA Only)$95,000—$115,000 USDWHAT TO EXPECT&nbsp;We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.&nbsp;&nbsp;&nbsp;Important information:FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here.Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Biow at <a href="mailto:g.biow@rocketlabusa.com.This" target="_blank">g.biow@rocketlabusa.com.This</a> dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:For security reasons background checks will be undertaken prior to any employment offers being made to an applicant.&nbsp; These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.&nbsp;Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality.&nbsp; For more information on these Regulations, click here&nbsp;ITAR Regulations.

Rocket Lab

Additive Manufacturing Engineer II - Hybrid (CNC/DED)

ABOUT ROCKET LABRocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. &nbsp;Join our pioneering team and launch your career to new heights!While other companies talk about it, we do it!ABOUT ENGINEERING AT ROCKET LAB:Engineering is at the heart of Rocket Lab. Our engineering team has a proven track record of designing and developing world-class rockets and spacecraft that are changing the way we access and use space. You’ll work alongside driven, talented engineers from varied backgrounds and experience levels, all committed to the same mission. Our engineering team members span design, analysis, prototyping, testing, manufacturing, assembly and integration, quality control, engineering documentation, and more.&nbsp;&nbsp;WHAT YOU'LL GET TO DO:As a Junior HITL Engineer at Rocket Lab, you will be responsible for designing, implementing, and maintaining our HITL (Hardware In The Loop) systems, which are crucial for Verification and Validation, and performance testing of our launch vehicles: Electron and Neutron.Your key responsibilities will include:<ul><li>Designing, operating and maintaining HITL systems.</li><li>Work and do hands-on testing with flight hardware.</li><li>Work in a cross-disciplinary team to verify the functionality and performance of Rocket Lab’s Launch Vehicles.</li><li>Operating the Launch Vehicle simulation platform for Day of Launch operations.</li><li>Creating and maintaining accurate technical documentation, including system diagrams, schematics, ICDs, procedures, and test/anomaly reports.</li><li>Analysing test results to determine pass/fail criteria.</li><li>Troubleshooting and identifying root causes of anomalies, and communicating results with internal teams, vendors, or customers.</li><li>Providing critical reviews for test plans, procedures, and documentation.</li><li>Operating and capturing data from test equipment such as DMMs, oscilloscopes, and logic analysers.</li></ul>You will also work closely with other departments including GNC (Guidance, Navigation and Control), FSW (Flight Software), Avionics, Propulsion, RF, OpSW (Operational Software), Ground Systems, and more to develop, build, and operate the HITL simulators. Your role is crucial in ensuring that our HITL systems are scalable, reliable, efficient, always online, and ready to go.YOU'LL BRING THESE QUALIFICATIONS:<ul><li>Bachelor / Master / PhD in Mechatronics, Computer Science, Electronics, or related field.</li><li>A strong theoretical and practical understanding of electronic systems.</li><li>Experience with software development.</li><li>Exposure to designing and implementing test systems for electronics.</li><li>Understanding of sensors and data acquisition systems.</li><li>Ability to work under pressure and meet tight deadlines.</li><li>Excellent communication skills with the ability to build strong working relationships.</li></ul>THESE QUALIFICATIONS WOULD BE NICE TO HAVE:<ul><li>Experienced operating Windows and Linux machines from CLI.</li><li>Python, C, C++, C#.</li><li>Knowledge of TCP/IP networking and subnetting.</li><li>Experience with digital and analogue signals, serial/TTL communications.</li><li>Experience in debugging electronics with Oscilloscopes and Logic Analysers.</li><li>Familiarity with CI (Continuous Integration) and Git.</li><li>Understanding of harness design, RF systems, and low voltage power systems.</li><li>Familiarity with CAD for test fixture and support equipment design.</li><li>Knowledge of embedded systems and PLCs.</li></ul>Rocket Lab Employee Benefits<ul><li>The opportunity to work on innovative and groundbreaking technology</li><li>An employee stock purchase program</li><li>Access to world leading experts to develop your career</li><li>Unlimited barista coffee, fruits and snacks</li><li>Rocket Lab merchandise – T-shirts, mission patches etc.</li><li>Discounted health insurance with Southern Cross</li><li>Additional parental leave entitlements</li><li>A vibrant team culture with social activities throughout the year</li></ul>If the above sounds like you,&nbsp;apply now!WHAT TO EXPECT&nbsp;We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.&nbsp;&nbsp;&nbsp;Important information:FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here.Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Biow at <a href="mailto:g.biow@rocketlabusa.com.This" target="_blank">g.biow@rocketlabusa.com.This</a> dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:For security reasons background checks will be undertaken prior to any employment offers being made to an applicant.&nbsp; These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.&nbsp;Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality.&nbsp; For more information on these Regulations, click here&nbsp;ITAR Regulations.

Junior HITL Engineer

ABOUT ROCKET LABRocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. &nbsp;Join our pioneering team and launch your career to new heights!WHAT YOU’LL GET TO DO:Enable Rocket Lab Engineers globally, by leveraging the last platform technology, to efficiently design, manufacture, and manage the next generation of rockets and space systems.Assist our fantastic team by providing subject matter expertise and support for our different platforms, operating system environments, and supporting infrastructure.Carry out upgrades and maintenance with a focus on continuous improvement to provide a reliable and secure infrastructure.Assist with and/or manage project planning and deployment for platform initiatives.Support the Configuration Management function(s) at Rocket Lab through the implementation of Standards for the deployment and management of the different platform environments to ensure:<ul><li>compliance with Rocket Lab Policies</li><li>compliance with Cybersecurity policies, standards, and procedures.</li><li>improvements to increase reliability of systems</li><li>system High Availability and Disaster Recovery</li><li>simplified and consistent environment management practises</li><li>complete and compliant system baselines and hardening guides for each OS and environment</li><li>automated build, deployment, and maintenance processes for each OS and environment</li><li>that the team is providing effective support</li><li>clear and concise reporting on usage, uptime, support levels, etc</li><li>comprehensive documentation of environments and support</li><li>efficient cost control</li></ul>Work with a team of world class IT, engineering, and business professionals.YOU’LL BRING THESE QUALIFICATIONS:<ul><li>5+ years of experience in IT.</li><li>2+ of those years of experience in a platform focused technology role.</li><li>Knowledge of one or more of the following: Kubernetes, VMware, Linux, Windows, Configuration Management, Automation, and/or Infrastructure as Code.</li></ul>THESE QUALIFICATIONS WOULD BE NICE TO HAVE:<ul><li>Scripting, automation, or Infrastructure as Code experience.</li><li>O365, Azure, and/or AWS experience.</li><li>Network (LAN\WAN) and security product support experience.</li><li>Security frameworks and technology: ISO 27001, NIST 800-171, IPSEC, SSL VPNs, firewalls, etc.</li><li>Experience with containerization technologies such as Docker and K8s.</li></ul>ROCKET LAB EMPLOYEE BENEFITS:&nbsp;&nbsp;<ul><li>The opportunity to work on innovative and ground breaking technology&nbsp;</li><li>An employee stock purchase program&nbsp;</li><li>Access to world leading experts to develop your career&nbsp;</li><li>Unlimited barista coffee, fruit, and snacks&nbsp;</li><li>Rocket Lab merchandise - T-shirts, mission patches etc.&nbsp;</li><li>Discounted health insurance with Southern Cross&nbsp;</li><li>Additional parental leave entitlements&nbsp;</li><li>A vibrant team culture with social activities throughout the year&nbsp;</li></ul>If the above sounds like you apply now!&nbsp;WHAT TO EXPECT&nbsp;We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.&nbsp;&nbsp;&nbsp;Important information:FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here.Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Biow at <a href="mailto:g.biow@rocketlabusa.com.This" target="_blank">g.biow@rocketlabusa.com.This</a> dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:For security reasons background checks will be undertaken prior to any employment offers being made to an applicant.&nbsp; These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.&nbsp;Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality.&nbsp; For more information on these Regulations, click here&nbsp;ITAR Regulations.

IT Systems Engineer I

ABOUT ROCKET LABRocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. &nbsp;Join our pioneering team and launch your career to new heights!NEUTRONNeutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab’s proven execution history with the Electron program. If you’re interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity!SENIOR MANUFACTURING ENGINEER - PROPULSIONBased out of Rocket Lab's Headquarters for Long Beach, CA the Senior Manufacturing Engineer - Propulsion is responsible for the machining development of new products and product revisions as related to both Rutherford and Archimedes engines. You will support the Director of Manufacturing Engineering and Production organization, with deliverables required for internal leadership, board of directors, and investors.WHAT YOU’LL GET TO DO:<ul><li>Contribute to design reviews acting as an expert in design for manufacture, design for machining, productivity, quality control, etc.</li><li>Select, procure, and install machine shop equipment along with developing maintenance/calibration plans.</li><li>Develop machining capability in-house for the Archimedes components and implement rapid iterations.</li><li>Design, develop, and implement tooling and equipment for use in a production environment where appropriate to improve quality, delivery and/or cost performance.</li><li>Responsible for continuous improvement and cost reduction projects belonging to the fabrication department.</li><li>Collaborate with other Rocket Lab machine shops for general alignment, capability, and support.</li></ul>QUALIFICATIONS YOU’LL BRING AS A SENIOR MANUFACTURING ENGINEER - PROPULSION:<ul><li>Bachelor’s degree in mechanical, aerospace, or manufacturing engineering</li><li>8+ years of experience with large composite, sheet metal, welded and/or fabricated assemblies</li><li>Knowledge of large structural welding and processes (such as GTAW, LBW)</li><li>Experience with machining and fabrication</li></ul>THESE QUALIFICATIONS WOULD BE NICE TO HAVE:<ul><li>Experience with design, testing and development in welded structures</li><li>Experience contributing to and steering design reviews and provide technical expertise in support of design for manufacture, test, and assembly</li><li>Well versed in GD&amp;T and inspection methods</li><li>Working experience with capacity modeling, process mapping, Lean/Six Sigma and value stream mapping</li><li>Experience with 3D CAD software and tooling design</li></ul>ADDITIONAL REQUIREMENTS:<ul><li>Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus</li><li>Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing &nbsp;</li><li>Must be physically able to commute to buildings&nbsp;</li><li>Occasional exposure to dust, fumes and moderate levels of noise</li></ul>Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.Base salary is just one component of our total rewards package at Rocket Lab.&nbsp; Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO &amp; a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, childcare concierge, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company’s discretion.Base Pay Range (CA Only)$115,000—$135,000 USDWHAT TO EXPECT&nbsp;We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.&nbsp;&nbsp;&nbsp;Important information:FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here.Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Biow at <a href="mailto:g.biow@rocketlabusa.com.This" target="_blank">g.biow@rocketlabusa.com.This</a> dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:For security reasons background checks will be undertaken prior to any employment offers being made to an applicant.&nbsp; These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.&nbsp;Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality.&nbsp; For more information on these Regulations, click here&nbsp;ITAR Regulations.

Senior Manufacturing Engineer - Propulsion

Insperity Services, L.P. DBA Insperity seeks a Senior Performance Test Engineer to work in Kingwood, Texas or remotely to gather&nbsp;non-functional requirements and act as an extended scrum team member on multiple teams and conduct system performance testing to ensure application reliability, capacity, and scalability. &nbsp;Collaborate with Product Owners, Business Users, and the Scrum team to identify performance requirements and develop a performance testing strategy. Design various types of performance test scripts and execute them based on the application requirements, which may include load testing, stress testing, spike testing, endurance/stability testing, and scalability testing scenarios. Monitor both client-side and server-side application performance using in-house and commercial tools. Analyze performance test results across multiple applications, participate in root cause assessments, and provide recommendations for improvements. Provide detailed level test reports. Collaborate with the Application Health and Performance team to monitor system performance post-deployment and use that information to continue to refine tests in pre-production. Suggest new tools and techniques to improve testing efficiency. Conduct training and provide assistance to Associate and Mid-Level Performance Test Engineers. Five percent domestic travel required to Kingwood, Texas for biannual meetings and training. Telecommuting permitted.The minimum requirements are as follows:<ul><li>Bachelor's Degree in Computer Science or a related field</li><li>5 years of experience with performance testing, including scripting and custom scripting, and software development.</li><li>Travel required: &nbsp;5% domestic travel required to Kingwood, Texas for biannual meetings and training.</li><li>Telecommuting permitted.</li></ul>Apply online at&nbsp;<a href="http://www.insperity.com" target="_blank">www.insperity.com</a>. Job ID:18744.

Insperity

Senior Performance Test Engineer

SciTec has been awarded multiple government contracts and is growing our creative Team! SciTec, Inc. is a dynamic small business with the mission to deliver advanced sensor data processing technologies and scientific instrumentation capabilities in support of National Security and Defense. We support customers throughout the Department of Defense and U.S. Government in building innovative new tools to deliver unique world-class data exploitation capabilities. Important Notice: SciTec exclusively works on U.S. government contracts that require U.S. citizenship for all employees. SciTec cannot sponsor or assume sponsorship of employee work visas of any type. Further, U.S. citizenship is a requirement to obtain and keep a security clearance. Applicants that do not meet these requirements will not be considered.SciTec has an immediate opportunity for a talented Senior Network Engineer to join our team in Boulder, CO. Successful applicants will bring deep experience with network engineering, a readiness to work hands-on keyboard to solve challenging network problems, a strong collaborative spirit, experience successfully mentoring junior team members, superior problem solving skills, a passion for security and data protection, and a clear focus on supporting customer needs. <ul><li>Design and deploy functional networks (LAN, WLAN, WAN) as a member of product teams and corporate infrastructure teams</li></ul><ul><li>Configure and install software, servers, routers, and other network devices</li><li>Monitor key network indicators (e.g., network performance, device health, status, integrity, etc.)</li><li>Resolve&nbsp;issues escalated by lower service desk tiers by troubleshooting deployed, cloud, and local infrastructure</li><li>Automate tasks and monitor their effectiveness</li><li>Mentor team members on technical issues</li><li>Create, oversee, and test security measures (e.g., access authentication and disaster recovery)</li><li>Communicate with users to design and field optimal solutions</li><li>Design and implement solutions to deliver superior network performance, capacity and scalability</li><li>Maintain complete technical documentation</li><li>Other duties as assigned</li></ul><h4>Requirements</h4><ul><li>7+ years of industry experience as a Network Engineer or&nbsp;Network Administrator</li></ul><ul><li>Professional certifications demonstrating Network Engineering competencies (e.g., CCNP, CCDP, Aruba professional)</li><li>Work background in network administration and architecture</li><li>Proficiency with network security principles, including monitoring, hardening, threat models, common vulnerabilities, and access control models </li><li>In-depth understanding of communication protocols (mainly TCP/IP) and routing protocols (e.g., BGP, OSPF)</li><li>Experience working with and troubleshooting OSI network layers for TCP/IP networks, via physical and software-based diagnostics and tools</li><li>Experience planning, deploying, and troubleshooting WAN, firewalls, LAN, DNS, VLANs, static and dynamic IP addressing, remote and point to point VPNs in on premises, cloud and hybrid environments such as Amazon Web Services and Microsoft Azure</li><li>Working knowledge of Storage Area Networks (SANs)</li><li>Experience configuring networks using a Fibre Channel Switched Fabric topology</li><li>Familiarity with application layer network and firewall configuration in Linux and VMware systems</li><li>Hands on experience with TACACS, Radius, authentication services and servers.</li><li>Knowledge of coding languages for scripting (e.g., Python, Perl)</li><li>Experience with network diagnostic, monitoring and analysis tools (e.g., SolarWinds network tools)</li><li>Strong understanding of network operating systems (JUNOS, Cisco IOS)</li><li>Proficiency with Linux and Windows operating systems</li><li>Sharp troubleshooting skills</li><li>Ability to work independently</li><li>Excellent organizational and mentoring skills</li><li>Ability to obtain and maintain a DoD security clearance</li><li>Demonstrated attention to detail</li><li> Good verbal and written communication skills </li></ul>Candidates with meeting the following criteria will be preferred:<ul><li>At least 1 year of ongoing professional experience with Dell switches, servers and SAN</li><li>At least 1 year of ongoing professional experience using VMWare vSphere and vCenter</li><li>Security+ certification</li><li>At least 1 year of ongoing professional experience with network-attached storage (NAS) and/or Storage Area Network (SAN) configuration and maintenance</li><li>At least 1 year of ongoing professional experience with Git / GitLab / Continuous Integration / Continuous Deployment</li><li>At least 1 year of ongoing professional experience with Container platforms, networking and security</li><li>An active DoD security clearance</li></ul>*Resumes, Cover Letters, and Applications which are generated by AI will not be considered for employment<h4>Benefits</h4>SciTec offers a highly competitive salary and benefits package, including:<ul><li>Employee Stock Ownership Plan (ESOP)</li><li>3% Fully Vested Company 401K Contribution (no employee contribution required) </li><li>100% company paid HSA Medical insurance, with a choice of 2 buy-up options</li><li>80% company paid Dental insurance</li><li>100% company paid Vision insurance</li><li>100% company paid Life insurance</li><li>100% company paid Long-term Disability insurance</li><li>Short-term Disability insurance</li><li>Annual Profit-Sharing Plan</li><li>Discretionary Performance Bonus</li><li>Paid Parental Leave</li><li>Generous Paid Time Off, including Holiday, Vacation, and Sick Pay</li><li>Flexible Work Hours</li></ul>The pay range for this position is $125,000- $166,000 / year. SciTec considers several factors when extending an offer of employment, including but not limited to the role and associated responsibilities, a candidate's work experience, education/training, and key skills. This is not a guarantee of compensation. SciTec is committed to hiring and retaining a diverse workforce and is proud to be an Equal Opportunity/Affirmative Action employer.

SciTec

Senior Network Engineer

Job Title Assistant Professor in Mechanical &amp; Aerospace Engineering Requisition Number FE03974 Working Title Assistant Professor Department Name 8H090:OISTL/Engineering Distance Learning Work Location Paducah, KY Type of Position Faculty Position Time Status Full-Time Tenure Track Status Tenure Track Required Education Applicants must hold a Ph.D. degree in Mechanical or Aerospace Engineering (or closely related field). Candidates with specialties in all areas of Mechanical and Aerospace Engineering will be considered. Required Related Experience None Required License/Registration/Certification None Job Summary The Department of Mechanical and Aerospace Engineering at the University of Kentucky invites applications for an Assistant Professor in Mechanical or Aerospace Engineering. The position is with the University of Kentucky’s mechanical engineering program at the extended campus in Paducah, KY. The College of Engineering administers ABET-accredited bachelor’s degree programs in mechanical engineering and chemical engineering at Paducah, with a total of nine full-time faculty. The position is a 9-month appointment in the Special Title Series (tenure-eligible). Faculty in the Special Title Series has a typical distribution of effort of 70% teaching, 20% research, and 10% service. Applicants should have a strong commitment to excellence in undergraduate education and the motivation to sustain a program of independent research and scholarship, the direction of undergraduate and graduate student research, and other independent and collaborative research endeavors. Research collaborations with local industry and faculty on the Lexington campus are encouraged. The anticipated start date is August 2024. Applicants must hold a Ph.D. degree in Mechanical or Aerospace Engineering (or a closely related field). Candidates with specialties in all areas of Mechanical and Aerospace Engineering will be considered. Candidates with teaching interests in Thermal-fluids, Experimentation, and/or Capstone Design are encouraged to apply. Candidates with a Professional Engineering (PE) license are preferred. Individuals currently employed in industry are encouraged to apply. Candidates should apply for the position (posting FE03974) online at <a href="https://ukjobs.uky.edu/" target="_blank">https://ukjobs.uky.edu/</a>; the priority deadline for acceptance of applications is March 15, 2024. To apply, please submit a cover letter (Cover Letter), current curriculum vitae (Curriculum Vita), a statement detailing teaching interests and experience (Specific Request 1), a statement of research interests (Specific Request 2), and the names of three to five references (Specific Request 3). Review of applications will begin immediately and will continue until the position is filled. For more information, contact Prof. Maddox, <a href="mailto:john.maddox@uky.ed" target="_blank">john.maddox@uky.ed</a>u. Information on the Paducah Programs can be found at: <a href="http://www.engr.uky.edu/paducah" target="_blank">http://www.engr.uky.edu/paducah</a> The University of Kentucky is an Equal Opportunity University. We encourage applications from all interested and qualified individuals. Skills / Knowledge / Abilities Does this position have supervisory responsibilities? No Preferred Education/Experience Deadline to Apply Open Until Filled Yes Our University Community We value the well-being of each of our employees and are dedicated to creating a healthy place for everyone to work, learn and live. In the interest of maintaining a safe and healthy environment for our students, employees, patients and visitors the University of Kentucky is a Tobacco &amp; Drug Free campus. As an Equal Opportunity Employer, we strongly encourage veterans, individuals with disabilities, women, and all minorities to consider our employment opportunities. Any candidate offered a position may be required to pass pre-employment screenings as mandated by University of Kentucky Human Resources. These screenings may include a national background check and/or drug screen.

808 Engineering Jobs