field_job_employment_type

job_industry

field_job_occupational_field_parents_all

job_organization_name

Primary Purpose of Job Under the direction of the Maintenance Area Lead, this position is responsible for training, coaching, and motivating hourly crafts personnel to provide reliable equipment consistent with customer quality and delivery requirements. Direct reports include a group of hourly personnel assigned to their area and shift. The incumbent communicates continually with the Engineering and EHS Departments, as well as with Control Technicians and Maintenance Leads. Externally, they communicate with vendors and contractors. Accountability Objectives Responsibilities include but are not limited to: <ul><li>Coaching, supervising, and training skilled craftspeople, apprentices, and laborers in the repair and maintenance activities associated with their assigned shift and area.&nbsp;</li><li>Assuming single point accountability for maintenance activities during their respective shift.&nbsp;</li><li>Performing frontline troubleshooting activities on equipment in area of responsibility.</li><li>Directing safety awareness programs to manage workforce safety, maintain housekeeping, and assist the Operations Department in area safety analysis.&nbsp;</li><li>Coordinating PM and other outage activities for equipment in area of responsibility.&nbsp;</li><li>Planning daily activities for assigned maintenance crews and provide the tools, materials, and technical direction for normal maintenance, preventative maintenance, and capital work in area of responsibility.&nbsp;</li><li>Performing root cause analysis and “5-why” techniques to eliminate maintenance downtime.&nbsp;</li><li>Partnering with the Engineering Department on repetitive maintenance problems to continuously improve the reliability of responsible equipment and facilities.&nbsp;</li><li>Coordinating and managing the development of maintenance work procedures and standard practices to maximize quality work and eliminate waste.&nbsp;</li><li>Driving continuous improvement activities to eliminate all waste, especially as it relates to maintenance downtime, safety, work practices, and employee involvement.&nbsp;</li><li>Assisting other Maintenance Supervisors, as needed.&nbsp;</li><li>Managing applicable labor issues effectively within respective work area.</li><li>Performing administrative requirements to effectively manage work force.&nbsp;</li><li>Performing other duties as assigned.&nbsp;</li></ul> Basic Qualifications For this position to be successful, the incumbent should have: <ul><li>A High School Diploma or GED equivalent from an accredited institution.&nbsp;</li><li>Minimum 3 years of maintenance supervisory experience within a heavy manufacturing environment or a minimum of 1 year of supervisory experience in the Military.</li><li>Minimum 1 year of experience in a unionized work environment.&nbsp;</li><li>This position is subject to the International Traffic in Arms Regulations (ITAR), which requires U.S. person status. ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. ‘Green Card Holder’), Political Asylee, or Refugee.&nbsp;</li></ul> Preferred Qualifications For this position to be successful, preference is given to candidates with: <ul><li>A technical college degree, journeyman status, or a military equivalent.&nbsp;</li><li>Experience with Allen Bradley programable logic controllers.&nbsp;</li><li>Working knowledge of motor control centers and distribution control systems.&nbsp;</li><li>Strong written and verbal communication skills.&nbsp;</li><li>Demonstrated ability to work in and lead a multi-dimensional team.&nbsp;</li><li>Troubleshooting experience on hydraulic and pneumatic systems.&nbsp;</li><li>A strong electrical and/or hydraulics background. &nbsp;</li></ul> Working Conditions This position involves moderate exposure to risk of accident and requires following basic safety precautions. Work is normally performed on the shop floor. While not exposed to hazardous materials, this position requires wearing full PPE to protect from mobile equipment, hot materials, and noise when on the shop floor. This position requires moderate physical activity, such as walking, sitting, and standing for extended periods of time, as well as some lifting. This position also requires a willingness to maintain a flexible work schedule and be available 24/7. About Howmet Aerospace Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $6.6 billion in revenue in 2023, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2023 Environmental Social and Governance report at&nbsp;<a>www.howmet.com/esg-report</a>. Follow: <a>LinkedIn</a>, <a>Twitter</a>, <a>Instagram</a>, <a>Facebook</a>, and <a>YouTube</a>. Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Howmet Aerospace

3rd Shift Maintenance Supervisor

Compensation Type: HourlyCompensation: $21.69Job SummaryThe Skilled Trades Lab Technician position provides support for the Chairperson, faculty, adjuncts and staff of the Design, Construction and Trades Department. This support includes inventory/preparation/ordering of consumables and tools, general cleaning of the lab, assisting with lab exercises inside and outside of class, tours for prospective students’ industry partners, and other duties as necessary. The technician performs routine preventive maintenance as needed, handling/disposing of hazardous chemicals, routine cleaning, and maintaining inventory records.Lab Inventory &amp; Facilities<ul><li>Stores, organizes, cleans tools, equipment, work spaces, and floors for class and lab areas. Assists faculty in preparing labs for semester and organizing areas at the end of semesters usage. Ensures tools, equipment and training aids are functional, operational, and performs needed diagnostic service and minor repairs. Replaces tools and equipment when necessary. Adheres to approved college standards regarding proper handling of hazardous materials. Utilizes College approved contractors to ensure proper handling of hazardous materials. Coordinates major service/repairs with external vendor, as needed. Collaborate with faculty/adjuncts to ensure proper/adequate tools and materials are available for classroom/lab instruction. Maintains and updates inventory of tools, special service kits, and equipment and stock items.</li></ul>Program Support<ul><li>Assists instructors and students in lab exercises; as requested. Opens/closes/monitors labs outside of class for additional student access. Answers routine questions, provides general information and performs duties as assigned to maintain good public and student relations. Performs routine maintenance and upkeep for labs and facilities.</li></ul>Administrative<ul><li>Monitors disbursements, orders needed items and obtains bid offers on new equipment. Keeps accurate records. Completes and maintains required documentation including inventory reports, consumables formulary, work orders, and requisitions. Monitors lab supply usages by section, communications with administration, and advises leadership regarding potential lab fee changes. Provides functional leadership for student support staff including providing training, mentorship, and support in completing assigned tasks.</li></ul>Culture of Respect<ul><li>Fosters and maintains a safe environment of respect and inclusion for faculty, staff, students, and members of the community.</li></ul>Other duties as required*Regular, predictable, and punctual attendance is required.OTHER DUTIES &amp; RESPONSIBILITIES<ul><li>Attends all required department meetings and training. Works assigned schedule.</li></ul>MINIMUM EDUCATION AND EXPERIENCE REQUIRED<ul><li>High School Diploma or equivalent and one (1) year experience in the trades industry (electrician, carpenter, plumbing, welding, etc.).</li><li>*An appropriate combination of education, training, coursework and experience may qualify a candidate.</li></ul>LICENSES AND CERTIFICATIONS<ul><li>State Motor Vehicle Operator's License or demonstrable ability to gain access to work site(s).</li></ul>KNOWLEDGE, SKILLS, &amp; ABILITIESKnowledge of: General trades technology programs, standard construction supplies, associated tools and equipment, routine equipment and tool maintenance, and minor repair methods; working with procurement software and services; working knowledge of Microsoft Office Word, Excel, and Outlook; basic research techniques to locate suppliers, availability, and costs for materials; safe working practices.Skill in: verbal and written communications; operation of job-related equipment; application of technical skills in applied technologies.Ability to: Use multiple Workday functions including, but not limited to procurement, ordering, and validating orders received; scheduling work independently, demonstrating initiative; develop and maintain effective working relationships with associates, supervisors, job contacts, students, and general public; perform light manual labor for extended periods of time; maintain accurate and complete work records, work in a safe manner while following safety regulations and procedures.PHYSICAL REQUIREMENTS<ul><li>Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions described in this position description. While performing duties of this job, the employee regularly exhibits digital dexterity when entering data into computer. The employee frequently sits for periods of time, stands, and walks. Employee converses verbally or manually with others in person as well as by telephone. Vision demands include close, relatively detailed vision when focusing on computer screen. Employee occasionally lifts up to 10 pounds.</li></ul>WORKING CONDITIONS<ul><li>Typical office environment. Regular exposure to moderate noise typical to business offices.</li></ul>CSCC has the right to revise this position description at any time. This position description does not represent in any way a contract of employment.Full Time/Part Time:Full timeUnion (If Applicable):Scheduled Hours:40Additional InformationIn order to ensure your application is complete, you must complete the following:<ul><li>Please ensure you have all the necessary documents available when starting the application process. For all faculty positions (Instructor, Annually Contracted Faculty, and Adjunct), you will need to upload an unofficial copy of your transcript when completing your aplication. </li><li>Prior to submitting your application, please review and update (if necessary) the information in your candidate profile as it will transfer to your application.</li></ul>If you are a current employee of Columbus State Community College, please log in to Workday to use the internal application process.Thank you for your interest in positions at Columbus State Community College. Once you have applied, the most updated information on the status of your application can be found by visiting your Candidate Home. Please view your submitted applications by logging in and reviewing your status.

COLUMBUS STATE COMMUNITY COLLEGE

Technician, Skilled Trades Laboratory

Summary: Howmet Structure Systems has an immediate opening for a Mechanical Maintenance Technician located at our Niles Facility. This position is responsible for assisting in the maintenance operation and preventative maintenance of manufacturing equipment within the plant. Primary Function: Perform routine preventative maintenance to ensure that machines continue to run smoothly, building systems operate efficiently, and the physical condition of the building does not deteriorate: Visually inspect and test machinery and equipment <ul><li>Listen for unusual sounds from machines or equipment to detect malfunction and discuss machine operation variations with supervisors or other maintenance technicians to diagnose the problem or repair the machine</li><li>Inspect drives, motors, and belts, check fluid levels, replace filters, and perform other maintenance actions, following checklists</li><li>Clean and lubricate shafts, bearings, gears, and other parts of machinery</li><li>Record maintenance and repair work performed and the costs of the work</li></ul> Troubleshoot and repair various aspects of production machinery, including saws, hydraulic presses and associated forging equipment:&nbsp; <ul><li>Repair and replace mechanical components and assemblies, including install of forging dies and fixtures, bearing assemblies, chains, belts and sliding component wear plates</li><li>Troubleshoot, diagnose, and repair hydraulic issues including loss of system pressures, cylinder actuation, pump or valve leaks or malfunctions; replace hydraulics pumps, motors, cylinders valves and other associated components</li><li>Plan and lay out repair work using diagrams, drawings, blueprints, maintenance manuals, and schematic diagrams</li><li>Align and balance new equipment after installations</li><li>Use tools ranging from common hand and power tools, such as hammers, hoists, saws, drills, and wrenches, to precision measuring instruments</li><li>Operate cutting torches or welding equipment to cut or join metal parts</li><li>Operate overhead cranes and hoists, forklifts, scissor, and boom lifts</li><li>Maintain a safe and organized workstation and follow all Company policies, safety, and procedures</li></ul> The above statements reflect the general details considered necessary to describe the principal functions of the job identified, and shall not be constructed as a detailed description of all the work requirements that may be inherent in the job. Basic Qualifications:&nbsp; Must have completed a recognized, appropriate Maintenance Mechanical Multi-craft apprenticeship or have at least eight (8) years of relevant on-the-job experience, to include industrial fabrication and maintenance weld or completed two (2) years of secondary vocational school and four (4) years of relevant on-the-job experience <ul><li>High school diploma or GED is required</li><li>3-5 years of experience</li><li>Ability to calculate figures and amounts and apply concepts of basic algebra and geometry</li><li>Must be able to carry out instructions furnished in written, oral, or diagram form</li><li>Ability to deal with problems involving several concrete variables in standardized situations.&nbsp;</li><li>The position requires an individual to stand, climb, work at heights, stoop, move equipment; bend, reach, or lift for prolonged periods of time. PPE includes FR9 clothing, safety glasses, hard hat, and steel toed boots with metatarsal protection, hearing protection and other safety equipment as required.&nbsp;</li></ul> *This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status.&nbsp; ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. *Employees must be legally authorized to work in the United States.&nbsp; Verification of employment eligibility will be required at the time of hire.&nbsp; Visa sponsorship is not available for this position is not available for this position About Howmet Aerospace Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $6.6 billion in revenue in 2023, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2023 Environmental Social and Governance report at&nbsp;<a>www.howmet.com/esg-report</a>. Follow: <a>LinkedIn</a>, <a>Twitter</a>, <a>Instagram</a>, <a>Facebook</a>, and <a>YouTube</a>. Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Maintenance Technician-Mechanical

ABOUT GREYSTARGreystar is a leading, fully integrated global real estate company offering expertise in property management, investment management, development, and construction services in institutional-quality rental housing, logistics, and life sciences sectors. Headquartered in Charleston, South Carolina, Greystar manages and operates more than $290 billion of real estate in 247 markets globally with offices throughout North America, Europe, South America, and the Asia-Pacific region. Greystar is the largest operator of apartments in the United States, manages more than 857,400 units/beds globally, and has a robust institutional investment management platform comprised of more than $76 billion of assets under management, including over $34 billion of development assets. Greystar was founded by Bob Faith in 1993 to become a provider of world-class service in the rental residential real estate business. To learn more, visit <a href="http://www.greystar.com" target="_blank">www.greystar.com</a>. JOB DESCRIPTION SUMMARYThis position performs technical and mechanical work that ensures the physical aspects of the buildings, grounds, amenities, and common areas of the property meet the Company’s standards for cleanliness, appearance, safety, and overall functionality.JOB DESCRIPTION•&nbsp;&nbsp; &nbsp;Completes assigned work orders generated from resident requests for service, as well as preventative maintenance on the property by diagnosing the source or cause of the defect or problem, and making repairs in accordance with established policies, procedures, safety standards, and code requirements. •&nbsp;&nbsp; &nbsp;Completes the “make-ready” process to prepare vacant apartment homes for leasing and new move-ins by completing the pre-move-out inspection, creating a “punch” list of maintenance work needed, scheduling vendors and contractors as needed, obtaining needed supplies and materials, completing all maintenance tasks, and inspecting completed work. •&nbsp;&nbsp; &nbsp;Follows procedures for accessing and obtaining materials, supplies, equipment, tools, and other items from the property’s maintenance department by tracking inventory used, returning unused items to the established location, and notifying the maintenance supervisor about re-ordering needs. •&nbsp;&nbsp; &nbsp;Completes documentation and other paperwork in a timely, accurate, and complete fashion so that service requests can be appropriately documented and tracked. •&nbsp;&nbsp; &nbsp;Assists in maintaining the grounds, common areas, and amenities by picking up trash and debris, pressure-washing breezeways and pool areas, performing general cleaning, and painting curbs and signage as needed. •&nbsp;&nbsp; &nbsp;Supports cost-cutting and expense control programs by fixing rather than replacing parts when possible, not being wasteful with materials and supplies, and practicing the correct use for tools and equipment. •&nbsp;&nbsp; &nbsp;Complies with Greystar’s safety and risk-management policies by attending and participating in the property’s routine safety meetings, completing required training on OSHA and other safety related laws and requirements, and by reporting accidents and incidents promptly and accurately. •&nbsp;&nbsp; &nbsp;May periodically inspect work performed by contractors, vendors and other service providers to verify the work, materials and services meet quality standards, scope and specifications as required. •&nbsp;&nbsp; &nbsp;Assists in conducting routine and periodic property inspections to identify safety and risk management concerns, keep the property in good repair, and communicate concerns about the physical needs of the property to management. •&nbsp;&nbsp; &nbsp;Follows established policies and procedures by monitoring and ensuring compliance with regulatory requirements, organizational standards, and operational processes related to area(s) of responsibility and reporting violations or infractions to appropriate individual(s). •&nbsp;&nbsp; &nbsp;Practices proper safety techniques in accordance with Company, property, and departmental policies, procedures, and standards by immediately reporting any mechanical or electrical equipment malfunctions, employee/visitor/resident injuries or accidents, or other safety issues to appropriate individual(s). •&nbsp;&nbsp; &nbsp;Identifies areas for improvement and offers suggestions to improve efficiency and productivity. •&nbsp;&nbsp; &nbsp;Keeps abreast of current changes in technology, processes, and standards within the industry and area(s) of responsibility by attending internal and external training classes, research and/or subscribing to the internet or other professional publications, or utilizing other appropriate method(s) to obtain business and professional information, and applies knowledge and practices to area(s) of responsibility.#LI-AG1The hourly range for this position is $16.20 - $22.55.Additional Compensation:<ul><li>Corporate Positions:&nbsp;In&nbsp;addition to the base salary, this role may be eligible to participate&nbsp;in&nbsp;an annual bonus program based on&nbsp;individual and company performance.</li><li>Onsite Property Positions:&nbsp;In&nbsp;addition to the base salary, this role may be eligible to participate&nbsp;in weekly, monthly, and/or quarterly bonus programs.</li></ul>Robust Benefits Offered*:<ul><li>Competitive Medical, Dental, Vision, and Disability &amp; Life&nbsp;insurance benefits. Low (free basic) employee Medical costs for employee-only coverage; costs discounted after 3 and 5 years of service.</li><li>Generous Paid Time off. All new hires start with 15 days of vacation, 4 personal days, 10 sick days, and 10 paid holidays. Plus your birthday off after 1 year of service! Additional vacation accrued with tenure.</li><li>For onsite team members, onsite housing discount at Greystar-managed communities are available subject to discount and unit availability.</li><li>6-Week Paid Sabbatical after 10 years of service (and every 5 years thereafter).</li><li>401(k) with Company Match up to 6% of pay after 6 months of service.</li><li>Paid Parental Leave and lifetime Fertility Benefit reimbursement up to $10,000 (includes adoption or surrogacy).</li><li>Employee Assistance Program.</li><li>Critical Illness, Accident, Hospital&nbsp;Indemnity, Pet&nbsp;Insurance and Legal Plans.</li><li>Charitable giving program and benefits.</li></ul>*Benefits offered for full-time employees. For Union and Prevailing Wage roles, compensation and benefits may vary from the listed&nbsp;information above due to Collective Bargaining Agreements and/or local governing authority.Greystar will consider for employment qualified applicants with arrest and conviction records.

Greystar

Maintenance Technician- Cleveland State University (Student Living)

Job Description: Under the supervision of the Maintenance Manager, the Maintenance Technician position is accountable for: <ul><li>Disassemble machines and take off parts for replacement or repair by using cranes, hoists, chain falls, hand tools, and jacks.</li><li>Examine or carry out tasks on broken machine parts and identify defective parts or give recommendations to supervisors on repair requirements.</li><li>Replace, fix, or realign machine parts and accessories in line with production specifications.</li><li>Put machine parts together after accomplishing maintenance and repair work. </li><li>Assists other maintenance team members in meeting department requirements while serving as a resource to production, engineering, and other plant personnel. Other individual maintenance craft knowledge considered a plus.</li><li>Work independently with little supervision.</li><li>Maintain a clean, organized, and safe work environment.</li><li>Exhibit outstanding ability to learn and comprehend the fundamentals of the functioning machines.</li><li>Excellent general understanding of hydraulic systems with display of mastery in troubleshooting by utilizing deductive reasoning and schematics</li><li>Perform other duties as assigned.</li></ul> Organization Location:&nbsp;3960 S Marginal Rd, Cleveland, OH 44114 Basic Qualifications: <ul><li>High School Diploma or equivalent (G.E.D.) from an accredited institution (Required)</li></ul> Preferred Qualifications: <ul><li>Ability to lift 40 pounds</li><li>Electrical controls awareness a plus.</li><li>Knowledge of machine mechanics, pneumatics, hydraulics, blueprint reading, (welding and fabrication a plus) operation of machine tools used to make, modify and/or repair machine components.</li><li>Experienced and knowledge in maintaining and repairing&nbsp;injection presses.</li><li>3+ years previous manufacturing experience</li><li>Journeyman's Card is preferred</li><li>Ability to effectively work AND communicate as part of a cell team</li></ul> While not exposed to hazardous materials, this position requires wearing PPE (personal protection equipment). Following all basic safety precautions will reduce risk of potential injury. This position requires anywhere from light to moderate physical activity, such as walking, sitting, and standing for extended periods of time, as well as some lifting. Benefits: <ul><li>Competitive wages</li><li>Clean, air-conditioned work facility (even on factory floor)</li><li>401k savings plan includes 3% of your eligible compensation, and a match of your deferred pre-tax savings dollar-for-dollar up to 6% of your base pay</li><li>Tobacco-Free Credit</li><li>Medical, Dental, Disability, Vision, and Life Insurance available</li><li>Vacation Eligibility</li></ul> Howmet Aerospace’s Mission and Values: Everyone, Everyday, Everywhere… We win when our customers win; we innovate, deliver, and operate as world class. We excel as high-performance teams safely, with respect and integrity. Howmet Aerospace holds a leading, global position in commercial transportation and military defense aircraft markets. Working in close partnership with our customers, we solve complex engineering challenges to transform the way we fly, drive, and power. Through the ingenuity of our people and cutting-edge advanced manufacturing techniques, we deliver these high-quality products at an efficient rate that ensure customer success, shareholder value, and strive to improve the fuel economy. Howmet Aerospace is where your career takes flight! Howmet Aerospace - Tempcraft is a key internal supplier to Howmet Engine Systems (HES) through two Business Centers: <ul><li>Patterns Business Center (Wax Patterns, Molds, and Plastic Airfoils).</li><li>Tooling Business Center (Wax, Plastic and Ceramic Injection Core Tooling, Fixtures, and Gauges).</li></ul> About Howmet Aerospace Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $6.6 billion in revenue in 2023, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2023 Environmental Social and Governance report at&nbsp;<a>www.howmet.com/esg-report</a>. Follow: <a>LinkedIn</a>, <a>Twitter</a>, <a>Instagram</a>, <a>Facebook</a>, and <a>YouTube</a>. Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Maintenance Technician

Who We Are Johns Manville is a leading manufacturer and marketer of premium-quality insulation and commercial roofing, along with glass fibers and nonwovens for commercial, industrial and residential applications. Our products are used in a wide variety of industries including building products, aerospace, automotive and transportation, filtration, commercial interiors, waterproofing and wind energy.A proud member of the Berkshire Hathaway family of companies, we serve customers in more than 80 countries around the globe. We are committed to delivering positive and powerful experiences, because we are successful only when our employees and customers thrive. We are passionate, we care about people, we perform at a superior level, and we protect others and our environments.CompensationThe base hourly rate for this position is $33.73.Johns Manville is currently hiring an Industrial Maintenance Mechanic at our Waterville, OH complex. We are searching for individuals who are dependable, responsible, and quality-minded who have a history of working safely in a manufacturing environment.The Waterville, OH location manufactures direct melt products including wet chop glass fibers primarily for specialty applications, glass reinforcements for gypsum wall boards, direct dry chop for plastic reinforcements, single end roving for weavers and plastic reinforcements, and glass mat.The base hourly rate for this position is $33.73.Your Day to Day:<ul><li>Follow all Johns Manville safety procedures and policies, which includes but not limited to LOTO and confined space entry procedures.</li><li>Troubleshooting issues, repair failures of production and facilities equipment, and ensure maximum equipment efficiency in the facility.</li><li>Perform gas cutting, welding, plumbing, and fabrication of equipment.</li><li>Perform preventative and predictive maintenance tasks as well as other precision-based maintenance methods.</li><li>Document work orders, descriptions, parts, and time in computerized maintenance management system</li></ul>What You Bring to Team:<ul><li>High school diploma or GED</li><li>Technical training is preferred (including vocational) and will be considered when looking at overall experience.</li><li>Repair experience with mechanical, pneumatic, hydraulic, and electrical components</li><li>Welding experience and knowledge</li><li>Ability to read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals and drawings.</li><li>Must be willing to work any shift (B-12a-8am; C-8am-4pm; D-4pm-12am; X-Swing) OR 12-hour rotating shift.</li><li>Verbal and written communication skills. Ability to write routine reports and correspondence legibly.</li><li>Basic computer skills: Microsoft Office Suite</li><li>Must be able to function within a Team environment effectively, but also maintain being a self-thinker.</li><li>Must be willing to work any shift (B-12a-8am; C-8am-4pm; D-4pm-12am; X-Swing) OR 12-hour rotating shift.</li><li>Valid driver's License</li><li>Must be able to occasionally lift 75 pounds.</li><li>Must be able to work at heights.</li><li>Must have own tools.</li></ul>This Position Offers: <ul><li>Competitive Shift Premium</li><li>Overtime and Double Time Pay (where appropriate)</li><li>Annual Merit Increases</li><li>401k match up to 7%</li><li>11 paid Holidays</li><li>Paid Vacation</li><li>Education reimbursement</li><li>Comprehensive medical, dental and vision plans</li><li>1-year anniversary 1 week of vacation, 2-year anniversary 2 weeks’ vacation</li></ul>Please Keep in Mind If you do not meet 100% of these requirements, we at JM still want to hear from you. So, if you are interested in the role, we encourage you to apply so we can learn how your skills and talents can contribute to our team.Benefits Johns Manville (JM) offers a wide range of benefits to employees. Some are subsidized by the company and others are fully employee-paid. Health benefits include a choice of comprehensive medical plans, a dental plan, vision plan, wellness program and critical illness insurance. JM sponsors a 401(k) plan which includes a sizeable company match. JM offers paid vacation and also provides paid sick and parental leave for eligible employees.Additionally, Johns Manville provides basic life Insurance, short-term and long-term disability coverage, an employee assistance program, and business travel accident coverage. Supplemental life insurance and accidental death and dismemberment insurance are available as well. The company also offers a variety of tax saving accounts; health spending account, traditional flexible spending account, and a dependent care spending account. JM also offers a tuition reimbursement program for undergraduate and certain graduate programs.Diversity &amp; Inclusion Johns Manville believes diversity and inclusion in our workplace is critical for the long-term success of our company. We are committed to retaining, developing and attracting a diverse workforce that fosters an inclusive work environment in which all employees are treated with dignity and respect. This is the right thing to do for our employees, our company and our communities. Our D&amp;I council is composed of employees from locations across North American &amp; Europe who meet regularly and work to promote and foster an environment of inclusion. Born from our D&amp;I council is our network of employee resource groups (ERGs) that are focused on supporting diverse communities in the workplace. Review more about our diversity &amp; inclusion initiatives on JM’s Career page.Incumbent must be physically able to perform essential job functions. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions.We are proud to be an Equal Opportunity/Affirmative Action employer. We maintain a drug-free workplace and perform pre-employment substance abuse testing.

Johns Manville

Industrial Maintenance

Immediately Hiring! Night Crew (7PM-7AM) -12 Hour&nbsp; Starting Rate: $35.00/hr+ based on experience! You deserve the best...and so do we! Take the first step toward a better future with a career at Howmet Aerospace! Are you an energetic and dependable employee that takes pride in your craft? Would you like to be a part of a dynamic and growing manufacturing business in Barberton, OH? Our organization is dedicated to rapid, profitable growth through continuous capital investment, operational excellence, and career development. Howmet is a company that promotes and develops from within with worldwide opportunities and we're looking for someone like you to join our team as a&nbsp;Full-Time Maintenance Technician (Night Crew, 7PM-7AM)&nbsp;in a production environment. If you are interested in taking the next steps in your career, we encourage you to apply! Company Benefits: We offer eligible employees a comprehensive benefits package designed to assist employees and their families with financial security, health, and well-being. In addition to competitive pay, we off a variety of benefit programs. <ul><li>Medical, Life, Dental and Vision Plans</li><li>401(k) Program with a Company Match</li><li>Performance Pay based on company results</li><li>Paid vacation accrual</li><li>10 annual paid holidays</li><li>Employee discount programs</li><li>Starting at $35.00-$42.35/hrwith an additional $1.00/hr shift differential for night crew</li></ul> WHAT IS A CAST HOUSE? The Cast House is a structure that holds an aluminum smelter. Howmet Aerospace's smelters are among&nbsp;the safest in the world. Our modern aluminum smelter will require trained and skilled operators. Position Summary:&nbsp; This position is for a role in the maintenance department at Howmet Aerospace’s Barberton Aluminum Remelt Foundry, known as the Howmet Barberton Casthouse. The plant operates a state-of-the-art and highly automated continuous horizontal aluminum casting operation on a nonstop (24/7/365) schedule.&nbsp;This is a fast paced and safety critical operation. The position is tasked with the daily maintenance requirements for maintaining the equipment and castlines operational, which includes championing the safety of all crew members, maintaining the integrity of equipment and other facility upkeep tasks with an emphasis on machine repair. The maintenance technician is tasked with supporting all aspects of the maintenance organization, performing preventative maintenance on equipment throughout the lifecycle of the casting process, troubleshooting malfunctioning equipment and performing repairs, and participating in reviews and special projects aimed at increasing equipment reliability. Essential Duties: <ul><li>Repairs, maintains and troubleshoots continuous process machinery performing mechanical and electrical repairs on equipment such as motors, pneumatic systems, conveyor systems, hydraulic systems, water systems, production machines and equipment in accordance with diagrams, specifications and operator’s manuals.</li><li>Dismantles devices and machines to gain access to and remove defective parts using hoists, hand tools, power tools, and cranes</li><li>Performing necessary maintenance work, such as replacing pumps, motors, chains ,spokets, cables, repair or replace drives, troubleshoot PLC logic, fabricate and mount guards, troubleshoot and adjust hydraulics.</li><li>Maintains personal safety equipment and promotes BCC Safety Regulations</li><li>Completes required PM’s and associated paperwork (CMMS System) Akron</li></ul> Basic Qualifications <ul><li>High School Diploma or GED (from an accredited institution)</li><li>Minimum of two years' experience performing mechanical OR electrical maintenance in a manufacturing environment</li><li>Knowledge and experience reading electrical and hydraulic drawings/schematics</li></ul> Preferred Qualifications <ul><li>Knowledge and experience working with combustion systems</li><li>Demonstrated knowledge and competencies relating to employee, equipment and product safety</li><li>Experience with equipment troubleshooting</li><li>Knowledge of mechanical and electrical repairing of machines, machine parts and maintenance practices</li><li>Experience with performing preventative maintenance on equipment</li><li>Five years experience performing mechanical and electrical maintenance in a manufacturing environment or foundry</li></ul> Working Conditions: <ul><li>Full time. Occasional weekend over-time work required.</li></ul> Physical Demands: <ul><li>Lifting&nbsp;:&nbsp; Moderately Heavy - Lift on an occasional basis a maximum of 40 pounds</li><li>Standing:&nbsp; Constantly (greater than 80% of workday)</li><li>Walking:&nbsp; Constantly (greater than 80% of workday)</li><li>Bending and Twisting:&nbsp; Constantly (greater than 80% of workday)</li><li>Temperature Extremes (percent of time working in non-climate controlled, production environment):&nbsp; Constantly (greater than 80% of workday)</li><li>Noise (percent of time working in noisy, production environment):&nbsp; Constantly (greater than 80% of workday)</li></ul> This description is a general statement of duties and responsibilities performed on a regular and continuous basis.&nbsp; This description is not intended to be all inclusive and other related duties may be assigned. <ul><li>Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position. Akron</li></ul> About Howmet Aerospace Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $6.6 billion in revenue in 2023, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2023 Environmental Social and Governance report at&nbsp;<a>www.howmet.com/esg-report</a>. Follow: <a>LinkedIn</a>, <a>Twitter</a>, <a>Instagram</a>, <a>Facebook</a>, and <a>YouTube</a>. Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> Howmet Wheel System is sold under Alcoa® Wheels brand which is a global leader in the commercial transportation industry, renowned for inventing the forged aluminum wheel in 1948. With a steadfast commitment to advancing technology, Alcoa Wheels has achieved a 35% weight reduction of forged aluminum wheels since 1996. The newest wheel ULT36 weighs a mere 36 lbs. Alcoa Wheels delivers breakthrough solutions with proprietary alloy and surface treatment technologies such as Dura-Bright®, Dura-Flange®, and Dura-Black®. All its innovative efforts make trucks, trailers, and buses lighter, more fuel-efficient, durable, and visually striking. With a global presence and extensive manufacturing capabilities, Alcoa® Wheels is dedicated to leading the industry toward a greener and more prosperous future.

Maintenance Technician (Cast House)

Maintenance Technician, 2nd Shift

Maintenance Technician, 3rd Shift

Who We Are Johns Manville is a leading manufacturer and marketer of premium-quality insulation and commercial roofing, along with glass fibers and nonwovens for commercial, industrial and residential applications. Our products are used in a wide variety of industries including building products, aerospace, automotive and transportation, filtration, commercial interiors, waterproofing and wind energy.A proud member of the Berkshire Hathaway family of companies, we serve customers in more than 80 countries around the globe. We are committed to delivering positive and powerful experiences, because we are successful only when our employees and customers thrive. We are passionate, we care about people, we perform at a superior level, and we protect others and our environments.Pay Range$75,800.00-$104,200.00 AnnualThis is the base salary pay range that an applicant can expect to make upon hire. &nbsp; Pay within this range will vary based upon relevant experience, skills, and education among other factors. In addition, this position is eligible for an incentive bonus.&nbsp;The purpose of the Maintenance Supervisor’s role is to oversee the maintenance department responsible for all equipment, property, buildings and facilities within a manufacturing plant.&nbsp; The incumbent in this position will also be responsible for supervising maintenance personnel and supporting the operations of production, engineering and safety departments.&nbsp;&nbsp;&nbsp;Your Day to Day: <ul><li>Act as technical expert in regard to mechanical equipment</li><li>Supervise, set direction, and delegate daily work of assigned hourly mechanical and electrical employees to support the plant goals of safety, environmental and production</li><li>Lead safety process, training for crews and accident investigations&nbsp;</li><li>Monitor safety and environmental processes and compliance</li><li>Identify, isolate and facilitate resolution of maintenance performance issues such as quality of work and work efficiency</li><li>Troubleshoot process equipment operational problems and maintain, repair, and upgrade plant equipment</li><li>Identify and execute ways to track metrics of performance and improve production levels of employees</li><li>Share knowledge and business experience with Plant management team</li><li>Manage projects including obtaining contractor quotes, design help and directing contractor crews</li><li>Facilitate training of maintenance personnel</li><li>Identify, implement, and maintain best maintenance and safety practices</li><li>Conduct daily and monthly shift meetings</li><li>Maintain and enforce good housekeeping strategies and methodologies</li><li>Oversee the maintenance scheduling and work order system</li><li>Manage the maintenance and operations of the mobile equipment fleet and storeroom inventory</li><li>Manage hourly time and attendance process&nbsp;</li><li>Assist with MRO purchasing issues through maintenance software&nbsp;&nbsp;</li><li>May be required to perform other related duties as assigned</li></ul>What You Bring to the Team:<ul><li>High School/Technical School diploma with a minimum of 10 years of manufacturing experience in a mechanical and/or electrical maintenance role</li><li>Bachelor’s degree in mechanical engineering or related field preferred with a minimum of 5 years’ experience managing&nbsp; an industrial maintenance hourly workforce</li><li>Experience in preventative and predictive maintenance with demonstrated success in increasing equipment reliability</li><li>Working knowledge of plant systems with the ability to troubleshoot and implement corrective actions</li><li>Solid understanding of pneumatics, hydraulics, air compressor systems, cutting/welding techniques, fluid dynamic systems, and metal fabrication&nbsp;</li><li>General knowledge of mobile equipment repair, A/C and chiller systems and hydraulics</li><li>Thorough knowledge of high, medium and low voltage systems/control systems and instrumentation, and general industrial electrical</li><li>Proficient in Microsoft Word, Excel, PowerPoint, Outlook</li><li>Working knowledge in AutoCAD drawing interpretation</li><li>Working knowledge of SAP systems preferred</li><li>Strong interpersonal, verbal, and written communication skills</li><li>Solid project management and presentation skills&nbsp;</li><li>Demonstrated leadership skills</li><li>Solid analytical and quality improvement ability</li><li>Ability to work independently and in a team environment</li><li>Ability to interface at all levels of the organization, both internally and externally (Solid)</li><li>Fundamental knowledge of laws, codes, and regulations (OSHA, National Electric Code, etc.)</li><li>Proficient in Microsoft Word, Excel, PowerPoint, Outlook</li><li>Willingness to respond to emergency situations outside normal work schedule</li><li>Manages a staff of 40 hourly union employees, sets direction and deploys resources. Responsible for performance evaluations, pay reviews, hiring, and terminating.</li><li>Minimal travel required (0 – 10 days per year).</li><li>Work environment is typical of a manufacturing facility; may be exposed to environmental conditions of cold, heat, high noise levels, moving mechanical parts, heights, dust/mist/gas/fumes, extensive walking or climbing, etc.</li><li>May be required to lift, carry, push or pull up to and including 50 pounds.</li></ul>Please Keep in Mind If you do not meet 100% of these requirements, we at JM still want to hear from you. So, if you are interested in the role, we encourage you to apply so we can learn how your skills and talents can contribute to our team.Benefits Johns Manville (JM) offers a wide range of benefits to employees. Some are subsidized by the company and others are fully employee-paid. Health benefits include a choice of comprehensive medical plans, a dental plan, vision plan, wellness program and critical illness insurance. JM sponsors a 401(k) plan which includes a sizeable company match. JM offers paid vacation and also provides paid sick and parental leave for eligible employees.Additionally, Johns Manville provides basic life Insurance, short-term and long-term disability coverage, an employee assistance program, and business travel accident coverage. Supplemental life insurance and accidental death and dismemberment insurance are available as well. The company also offers a variety of tax saving accounts; health spending account, traditional flexible spending account, and a dependent care spending account. JM also offers a tuition reimbursement program for undergraduate and certain graduate programs.Diversity &amp; Inclusion Johns Manville believes diversity and inclusion in our workplace is critical for the long-term success of our company. We are committed to retaining, developing and attracting a diverse workforce that fosters an inclusive work environment in which all employees are treated with dignity and respect. This is the right thing to do for our employees, our company and our communities. Our D&amp;I council is composed of employees from locations across North American &amp; Europe who meet regularly and work to promote and foster an environment of inclusion. Born from our D&amp;I council is our network of employee resource groups (ERGs) that are focused on supporting diverse communities in the workplace. Review more about our diversity &amp; inclusion initiatives on JM’s Career page.Incumbent must be physically able to perform essential job functions. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions.We are proud to be an Equal Opportunity/Affirmative Action employer. We maintain a drug-free workplace and perform pre-employment substance abuse testing.

27 Facilities and Maintenance Jobs in Ohio