field_job_employment_type

job_industry

field_job_occupational_field_parents_all

field_job_experience

job_organization_name

(Per Diem) - flexible hours!DUTIES AND RESPONSIBILITIES:<ul><li>To provide safe and clean transportation for, admissions, discharges, appointments, outside meetings, residences, or other locations as determined or requested by, clinical, medical or admissions.</li><li>Maintain all Caron trainings through net learning as well as classroom.</li><li>Once a trip is accepted, you are responsible for maintaining a personal reminder for scheduled trips.</li><li>Drive within a 250-mile radius, or further if required.</li><li>Responsible for all trip related paperwork, pre and post</li><li>Responsible for refueling vehicle after trip is complete.</li><li>Must be able to learn limited computer tasks like but not limited to checking emails, completing work orders and or incident reports on a computer.</li><li>Must be available to the department to perform other duties.</li><li>Responsible for keeping the vehicles clean inside, food and drinks are prohibited.</li><li>Report any vehicle related issues immediately to the on-duty dispatcher or the supervisor of transportation.</li><li>Always maintain a professional demeanor.</li><li>Provide quality customer service.</li><li>Adhere to all Caron policies as well as transportation procedures and guidelines.</li></ul>PHYSICAL REQUIRMENTS:<ul><li>Must be able to climb up and down stairs.</li><li>Must be able to lift and carry up to 50 lbs. In and out of vehicles and up and down stairs.</li></ul>QUALIFICATIONS:<ul><li>Must be 25 years of age or older.</li><li>Must produce and maintain a valid driver’s license in accordance with Driving Standards Policy</li><li>Must meet minimum requirements on Motor Vehicle Reports in accordance with Driving Standards Policy.</li><li>If recovering, a minimum of one year of continuous sobriety is preferred.</li><li>CPR and First Aid certifications, these will be obtained upon starting employment at Caron. It is your responsibility to maintain these as needed through Caron training thereafter.</li><li>Neloxone/Narcan certification must be obtained during 1st day of inner Dept. training</li><li>High school diploma or equivalent preferred.</li></ul>KNOWLEDGE, SKILLS AND ABILITIES:<ul><li>Must be able to get along with clients and staff.</li><li>Must be able to work flexible hours.</li><li>Must be able to read maps, understand and navigate via GPS.</li></ul>COMPETENCE MEASUREMENT:<ul><li>Transport patients in a professional manner – Measured through patient surveys, staff feedback.</li><li>Proficiency in reading maps and following driving directions – observation through length of time necessary to complete trips and staying on route.</li><li>Safe driving record – observation through law enforcement activity and absence of vehicular damage.</li></ul>

Caron Treatment Centers

Per Diem Driver

Company Description About Veolia North America A subsidiary of Veolia Group, Veolia North America (VNA) offers a full spectrum of water, waste and energy management services, including water, and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. VNA helps commercial, industrial, healthcare, higher education, and municipality customers throughout North America. Headquartered in Boston, Mass., Veolia North America has approximately 10,000 employees working at more than 350 locations across the continent. Please visit our website <a href="http://www.veolianorthamerica.com" target="_blank">www.veolianorthamerica.com</a>. Job Description Targeted Hourly Pay Range: Minimum of $28 to a maximum of $30 BENEFITS Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental and vision insurance. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. Position Purpose: Responsible for safely transporting hazardous and non-hazardous materials from the customer site to the appropriate designated sites using van trailers, straight trucks, flatbeds, tankers, roll-off frames, or other waste carrying equipment. Ensures that the condition of the material packaging meets the U.S. Department of Transportation (DOT) specifications, inspects manifests and shipping paperwork for accuracy, and maintains current transportation permits for all areas traveled. Abides by all regulations set forth by DOT, EPA, state and local governments, and VES-TS policies and procedures. Primary Duties/responsibilities: <ul><li>Perform daily inspections of vehicle and/or trailer prior to driving to ensure the safety and integrity of equipment going to designated sites.</li><li>Prior to transporting materials reviews shipment records, manifests, container labeling, vehicle placards, and integrity of loaded drums, roll-off boxes or bulk tankers.</li><li>Ensure that DOT requirements such as load weight limits, driver log books, Vehicle Inspection Records, transportation permits, insurance cards, fuel trip reports, IFTA fuel stickers, or other paperwork is up to date and valid.</li><li>Consults with customers pertaining to load conditions, drum counts or paperwork inconsistencies to ensure that materials can be properly transported to designated site(s).</li><li>Notify immediate supervisor of any moving violations and/or accidents in-route to and/or from sites.</li><li>Assist in the loading/unloading of materials at designated sites utilizing appropriate equipment.</li><li>Responsible for assisting with housekeeping as required.</li><li>Other duties as assigned</li></ul> Qualifications Education / Experience / Background: <ul><li>High School diploma or General Educational Development (GED) required</li><li>Prior commercial driving experience required</li></ul> Knowledge / Skills / Abilities: <ul><li>Familiarity with U.S. Department of Transportation (DOT) regulations pertaining to the transportation of hazardous and non-hazardous materials</li><li>Strong team player</li><li>Excellent interpersonal and communication skills</li><li>Time management: the ability to organize and manage multiple tasks</li><li>Strong customer service orientation</li></ul> Required Certification / Licenses / Training: <ul><li>Valid Class A Commercial Driving License (CDL) required</li><li>Hazmat (H) endorsement required</li><li>Tanker (T) endorsement required</li><li>40-Hour HAZWOPER training preferred</li></ul> Additional Information We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law. Job Location

Regional Driver

Gold Coast JCB is the JCB dealer for southeast FL with a strong commitment to be the best service department in the area. We are looking for Technicians that want to grow their careers with a company that will support them and be proud of. Seeking a Mobile Construction Equipment Technician/Mechanic with strong diagnostic skills who can easily communicate with customers. Come grow with us.At JCB, we stand behind our products – and our name.Position PurposeReporting to the Service Manager, the Service Field Technician is responsible for diagnosing, repairing and maintaining various types of heavy machinery, aerial equipment, generators, and other equipment for construction, industrial, agricultural and government applications. Always providing the best customer service possible by focusing on customer uptime, utilizing Gold Coast JCB unique abilities&nbsp;as JCB authorized dealer in the territory.Major Tasks, Responsibilities &amp; Key Accountabilities<ul><li><ul><li>Drive to and from customer jobsites or facilities on a company service truck, to perform services on the field.</li><li>Complete and turn in reports that capture all time and work completed, with clear notes.</li><li>Provide diagnostic analysis, repair, or preventive maintenance for customer and company machines.</li><li>Assist and work with other technicians on complicated jobs and when required.</li><li>Ability to mentor, teach and advice other technicians.</li><li>Complete in shop or on-site system audits and evaluations on machines.</li><li>Assists with customers product clinics, field days, and related promotional events as needed.</li><li>Review work orders for completeness and accuracy, for Service Manager to be able to close and process billing.</li><li>Keep Service Department tools, equipment and company vehicles in good working and safe conditions.</li><li>Practice and adhere to all safety policies and training.</li><li>Maintain a clean and professional image according to JCB and Gold Coast JCB standards.</li><li>Conduct business in alignment with company’s Mission, Vision, and Core Values.</li></ul></li></ul>Minimum Qualifications <ul><li><ul><li>College degree in Diesel or Technical related field.<ul><li>Will consider equivalent work experience in lieu of educational qualifications.</li></ul></li><li>10+ years of experience as Service Technician or similar position, in a heavy machinery, truck, or diesel engine industry, with proven track record.</li><li>Strong written and verbal communications skills.</li><li>Knowledge of heavy machinery, truck or diesel engine industries.</li><li>Strong computer skills to perform diagnostics, complete and submit reports, etc.</li><li>Ability to travel.</li><li>Ability to lift up to 75 pounds.</li></ul></li></ul>Preferred Qualifications<ul><li>Bilingual: English/Spanish</li></ul>Knowledge, Skills, Abilities&nbsp;&amp; Competencies<ul><li>Proficient in Microsoft Office software</li><li>Comfortable in an in-person office environment</li><li>Technical competence is a plus</li><li>Must be customer service oriented, flexible, and have a high energy level</li><li>Must have excellent follow-through skills</li><li>Must have a professional, polished, and sophisticated demeanor and be comfortable in most social settings</li><li>Must be open to domestic and international travel</li><li>Desire and proven ability to learn and grow</li></ul>Physical Requirements:The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.While performing the duties of this job, the employee is regularly required to:<ul><li><ul><li>Ability to stand and walk with frequent lifting, guiding and/or carrying of lightweight materials and equipment for up to 12 hours.</li><li>Ability to twist upper body frequently, bend at waist, kneel, crouch and negotiate uneven surfaces.</li><li>Able to lift up to 75 pounds * Use hands, arms and legs fully; grasp, manipulate and assemble small to large objects with the aid of forklifts or cranes as needed; see and hear well. Must be able to hear well with or without aid.</li><li>Good hand eye coordination.</li><li>Communicate by speech and hearing in person at a basic English and Spanish proficiency.</li></ul></li></ul>Gold Coast JCB is an equal employment opportunities (EEO) employer in accordance with applicable federal, state and local laws. Gold Coast JCB complies with applicable state and local laws governing non-discrimination in employment in every location in which the company has facilities. EEO EMPLOYER/VET/DISABLED Apply Now <h4>Other details</h4><ul><li> Job Family Customer Service</li><li> Pay Type Hourly</li></ul>

Gold Coast JCB - Field Service Technician - Miami

Howmet Aerospace, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. The Company’s primary businesses focus on jet engine components, aerospace fastening systems and titanium structural parts necessary for mission-critical performance and efficiency in aerospace and defense applications, as well as forged wheels for commercial transportation. Howmet Aerospace is transforming the next phase of more fuel-efficient, quieter aerospace engines and sustainable ground transportation. For more information, visit&nbsp;<a>www.howmet.com</a>. Follow @howmet:&nbsp;Twitter,&nbsp;Instagram,&nbsp;Facebook,&nbsp;LinkedIn&nbsp;and&nbsp;YouTube. This off-shift&nbsp;LAUE TECHNICIAN&nbsp;position will be located in our Plant 10, Whitehall Casting Operation.&nbsp; Primary responsibilities will include: <ul><li>Process and inspect castings per customer requirements using specific inspection techniques.&nbsp;</li><li>Work within assigned area as a team member to maintain production schedules.</li><li>Inputs inspection data into computerized traceability system.</li><li>Complies with all EHS rules required for the position.&nbsp;</li><li>Performs other duties as assigned.</li><li>Must be willing to work overtime and off-shift as required by production schedules.</li><li>The work week may include Saturday and Sunday as regular scheduled hours.</li></ul> Must be able to work off-shift (2nd, 3rd, and weekend crew) Basic Qualifications: <ul><li>High school diploma or GED from an accredited institution.</li><li>Minimum of two years work experience; or six months continuous manufacturing experience.&nbsp;</li><li>​Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li></ul> Preferred Qualifications: <ul><li>Industrial manufacturing and/or quality control/non-destructive inspection experience,</li><li>Previous experience with industrial radiography.</li><li>Basic computer skills.</li><li>Ability to read and interpret specifications.</li></ul> About Howmet Aerospace Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $6.6 billion in revenue in 2023, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2023 Environmental Social and Governance report at&nbsp;<a>www.howmet.com/esg-report</a>. Follow: <a>LinkedIn</a>, <a>Twitter</a>, <a>Instagram</a>, <a>Facebook</a>, and <a>YouTube</a>. Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Howmet Aerospace

LAUE TECHNICIAN - Plant 10

Join the Clean Energy RevolutionBecome&nbsp;an&nbsp;Wireless Telecommunications Engineer 3&nbsp;at Southern California Edison (SCE) and build a better tomorrow.&nbsp;&nbsp;In this job, you’ll will be in the Network &amp; Telecommunications Services-Wireless Engineering group, and will create network designs to support various wireless networks including ISM-band mesh, VSAT satellite, Land Mobile Radio, unlicensed point-to-point unlicensed, and LTE. SCE leverages these systems for critical business systems including Grid Control, Field Voice Communication, Metering, Demand Management, and Wildfire Risk Mitigation. This position will also assist with the evaluation and introduction of new wireless platforms to meet emerging company use cases. As a Wireless Telecom Engineer, you will: &nbsp;<ul><li>Evaluate requirements of assigned projects within established telecom communication system standards to meet project and system objectives, considering a wide variety of complex factors such as accessibility, availability of power, and proximity to other SCE facilities.&nbsp;</li><li>Develop plan of service for projects, including elements such as required communications facilities, facility site location, required systems, etc.&nbsp;</li><li>Develop project cost and schedule estimates, incorporating complete scope, cost, and schedules conveyed to internal clients and external customers.&nbsp;</li><li>Create and issue design documentation for assigned projects and oversee execution of designs by implementation resources.&nbsp;</li><li>Track project delivery including scope, schedule and budget with internal Network &amp; Telecommunication Services, construction service providers, and internal client operating units.&nbsp;</li><li>Coordinate with vendors, external utilities, governmental agencies, and external clients as required to complete.&nbsp;</li><li>Mentor junior engineers to foster understanding of wireless engineering principles.&nbsp;</li><li>Evaluate and operationalize alternative wireless technologies to meet current and future business requirements.&nbsp;</li><li>Maintain a safety conscious work environment by following Edison safety protocols and safe work practices. </li></ul>As an&nbsp;Wireless Telecommunications Engineer 3, your work will help power our planet, reduce carbon emissions and create cleaner air for everyone. Are you ready to take on the challenge to help us build the future?<h4>Responsibilities</h4><ul><li>Ensures technical issues and problems are resolved in a timely, efficient and cost-effective manner utilizing available resources</li><li>Supervises, leads, and coordinates work with full time and contract employees in the execution of new technical strategies, equipment or standards.</li><li>Conducts life cycle assessments for utility infrastructure materials and processes; improves preventive maintenance procedures to decrease overall downtime</li><li>Conducts risk assessments and implements risk mitigation strategies to ensure the safety and reliability of engineering projects</li><li>Supports audits and inspections; ensures compliance with relevant environmental, health, and safety regulations</li><li>Provides engineering and technical expertise and guidance for the identification, analysis and resolution of high impact, complex and/or cross-functional problems in engineering</li><li>Ensures the engineering facility design basis is controlled and design basis documentation is maintained</li><li>Conducts engineering and related studies with full technical responsibility for planning and coordinating high-impact complex projects</li><li>Provides support and technical training to junior engineering levels</li><li>A material job duty of all positions within the Company is ensuring the protection of all its physical, financial and cybersecurity assets, and properly accessing and managing private customer data, proprietary information, confidential medical records, and other types of highly sensitive information and data with the highest standards of conduct and integrity.</li></ul><h4>Minimum Qualifications</h4><ul><li>Bachelor's Degree in Engineering or Bachelor's Degree in a scientific/technical/math field.</li><li>Five or more years of experience performing engineering work in operations, production, construction or maintenance environments.</li><li>Possess a valid Class C Driver's License.</li></ul>Preferred Qualifications<ul><li>Master’s Degree in relevant Engineering discipline&nbsp;</li><li>Two or more years of experience in a Telecommunications field.</li><li>Two or more experience working in telecommunication networks, either in the electrical utility industry, telecom utility industry, or another utility industry.</li><li>Experience with ISM mesh radio networks, VSAT satellite networks, LTE networks, and land mobile radio systems.&nbsp;</li><li>Experience with large-scale wireless network deployment.&nbsp;</li><li>Experience and understanding of electric utilities, telecommunications carriers, or a related field.</li><li>Experience with hands-on field troubleshooting related to telecom or wireless.</li><li>Experience with RF (Radio Frequency) systems.</li></ul>Additional Information<ul><li>This position’s work mode is&nbsp;hybrid.&nbsp;The employee will report to an SCE facility for a set number of days with the option to work remotely on the remaining days.  Unless otherwise noted, employees are required to work and&nbsp;reside in the state of California.  Further details of this work mode will be discussed at the interview stage.&nbsp;The work mode can be changed based on business needs.</li><li>Visit our&nbsp;Candidate Resource&nbsp;page to get meaningful information related to benefits, perks, resources, testing information, hiring process, and more!</li></ul><ul><li>Qualified applications with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act.&nbsp;</li><li>The primary work location for this position is&nbsp;Rosemead.&nbsp;&nbsp;However, the successful candidate may also be asked to work for an extended amount of time at&nbsp;alternate work locations throughout the SCE service territory.</li><li>Position will require up to 20%&nbsp;traveling and being out in the field throughout the&nbsp;SCE service territory.</li><li>This position has been identified as a NERC/CIP impacted position - Prior to being hired, the successful candidate must pass a Personnel Risk Assessment (PRA) or Background Investigation.&nbsp; Once hired, the candidate must complete specified training prior to gaining un-escorted access to assigned work location and performing necessary job duties.</li><li>Relocation does not apply to this position.</li></ul>About Southern California EdisonThe people at SCE don't just keep the lights on. Our mission is so much bigger. We’re fueling the kind of innovation that’s changing an entire industry, and quite possibly the planet. Join us and create a future with cleaner energy, while providing our customers with the safety and reliability they demand. At SCE, you’ll have a chance to grow personally and professionally, making a real impact in Southern California and around the world.At SCE, we celebrate our differences. We are a proud Equal Opportunity Employer and will not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status or any other protected status.We are committed to ensuring that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodations at (833) 343-0727.

Southern California Edison

Wireless Telecommunications Engineer 3

<h4>How you will change lives</h4>As a Patient Care Technician (PCT) at US Renal Care, you will be an integral part of a cross-functional team providing care and delegated activities of treatment to patients. The PCT will work under the supervision of a Registered Nurse (RN) or Charge Nurse (CN) for patients with renal failure.<h4>What you'll be doing</h4>Patient care. You will work directly with patients to provide safe, comfortable, and high-quality dialysis treatment. Responsibilities include gathering patient stats before and after treatment, initiating treatment, monitoring patients during treatment, terminating treatment, and collecting patient blood samples per physician orders.Technician Duties. You will ensure quality comes first by preparing machines for hemodialysis treatments, cleaning and disinfecting machines after treatment, and conducting machine safety checks and logging results for quality control, ensuring all protocols and regulations are followed.Safety and Quality. You will use appropriate safety measures, including personal protective equipment. Working under the supervision of a Charge Nurse, you will adhere to all company policies, procedures, and state/federal laws and regulations. You will participate in all required staff meetings and continuing education offerings.PATIENT CARE TECHNICIAN STATE SPECIFIC BOARD OF NURSING REQUIREMENTS California<ul><li>Must possess current Certified Hemodialysis Technician (CHT) certificate from California Department of Public Health (CDPH) at time of hire OR</li><li>Hired at USRC location recognized by state of California as an approved dialysis technician training program and obtain California state certification (CHT) within six (6) weeks of successful completion of training program. </li></ul>Maryland<ul><li>Must possess current Certified Nursing Assistants -- Dialysis Technicians (CNA-DT) certificate from Maryland Board of Nursing OR</li><li>Hired at USRC location recognized by state of Maryland as an approved dialysis technician training program and obtain Maryland CNA-DT certificate within three (3) months from date of hire OR</li><li>Out-of-state applicant must have active BONENT certification and provide proof of initial application for CNA-DT certification.</li></ul>New Mexico<ul><li>Must have New Mexico dialysis technician certificate at time of hire OR</li><li>Hired at USRC location recognized by state of New Mexico as an approved dialysis technician training program and obtain New Mexico state certification within six (6) months of successful completion of training program OR</li><li>New Mexico certification of hemodialysis technician is required for out of state applicant with active state or national hemodialysis certification; must obtain New Mexico state certification prior to working as a Certified Hemodialysis Technician. </li><li>After January 1st, 2024, all initial applications for the certified hemodialysis technician will require a national hemodialysis technician certificate.</li><li>The applicant must submit proof of a valid national hemodialysis technician certificate from a recognized organization.</li><li>Hemodialysis technician students must have a current basic life support credential prior to and while the student has contact with patients</li></ul>OHIO<ul><li>Must have Ohio dialysis technician intern certificate at time of hire OR</li><li>Hired at USRC location recognized by state of Ohio as an approved dialysis technician training program and submit application for Ohio dialysis technician intern certificate to board no later than four (4) weeks prior to completion of the approved training program.</li><li>Must obtain Ohio Board of Nursing Certificate (OCDT) not less than twelve (12) months and not later than eighteen (18) months of enrolling in the USRC OCDT program.</li></ul>OREGON<ul><li>Must possess current Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division at time of hire OR</li><li>Must obtain Oregon dialysis technician provisional certificate within three (3) weeks of successful completion of training program and obtain Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division within eighteen (18) months. An Oregon Provisional Certification is valid for six months and can be renewed for one additional six month period.</li></ul>&nbsp;

U.S. Renal Care

Dialysis Patient Care Technician

Howmet Aerospace, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. The Company’s primary businesses focus on jet engine components, aerospace fastening systems and titanium structural parts necessary for mission-critical performance and efficiency in aerospace and defense applications, as well as forged wheels for commercial transportation. Howmet Aerospace is transforming the next phase of more fuel-efficient, quieter aerospace engines and sustainable ground transportation. For more information, visit&nbsp;<a>www.howmet.com</a>.&nbsp;Follow @howmet: Twitter, Instagram, Facebook, LinkedIn and YouTube. This Engineering Technician position will be located in our Plant 3, Whitehall Casting Operation.&nbsp; Primary responsibilities will include: <ul><li>Assist engineers in re port preparation, process approval packages, dimensional reports, deviated material reports, etc.</li><li>Assists manufacturing/engineering with NPI start-up activity – proper execution of development trials, manufacturing instructions, quality issues, equipment trouble shooting, etc.</li><li>Monitors product/process to identify areas for improvements and cost reduction.</li><li>Reviews nonconforming materials for cause and corrective action and MRB submittal.</li><li>Assists in expediting the flow of NPI product through the manufacturing processes to meet the customer delivery requirements and HWC commitments.</li><li>Complies with all EHS rules required for the work environment.</li><li>Performs other duties as assigned.</li></ul> Basic Qualifications: <ul><li>Associate degree in manufacturing industrial or mechanical technology from an accredited institution.</li><li>Minimum of one year experience working in an engineering or manufacturing environment.</li><li>Employees must be legally authorized to work in the United States.&nbsp; Verification of employment eligibility will be required at the time of hire.&nbsp; Visa sponsorship is not available for this position.</li></ul> Preferred Qualifications <ul><li>Good oral and written communication skills.</li><li>PC literate in Microsoft Word and Excel.</li><li>Familiarity with Access, Microsoft Office and Mini-Tab.</li><li>Experience working in a layout environment and/or working with CAD / Unigraphics.</li></ul> About Howmet Aerospace Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $6.6 billion in revenue in 2023, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2023 Environmental Social and Governance report at&nbsp;<a>www.howmet.com/esg-report</a>. Follow: <a>LinkedIn</a>, <a>Twitter</a>, <a>Instagram</a>, <a>Facebook</a>, and <a>YouTube</a>. Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

ENGINEERING TECHNICIAN - Plant 3

H.O. Penn MachineryHIRING IMMEDIATELYShop Mechanic – Construction EquipmentPoughkeepsie, NYPay: $45.71-$56.34/hour&nbsp; Benefits:<ul><li>UNION Shop!</li><li>Pension</li><li>Welfare, annuity, and vacation funds</li><li>Medical/dental/vision insurance</li><li>Paid company holidays</li></ul>Key qualifications:<ul><li>Minimum three years’ experience in troubleshooting and repair of Heavy Construction Equipment, CAT preferred</li><li>Must be computer proficient to be able to run diagnostic software and prepare service communications</li><li>Must have excellent verbal and written communication skills</li><li>Must be able to troubleshoot technical problems, meet or exceed labor repair guidelines, possesses the ability to plan and efficiently complete assigned tasks&nbsp;</li><li>CDL&nbsp;License preferred</li></ul>Responsibilities:Successfully provide service of recognized superior value.<ul><li>Troubleshoot problems</li><li>Efficiently utilize resources to correct problems</li><li>Document steps taken to correct problems</li></ul>Maximize the efficient use of service and repair processes to provide fast accurate service and minimize unnecessary expense.<ul><li>Plan proper repair procedures for efficiency</li><li>Efficiently utilize tooling and technical resources</li><li>Continually improve key processes</li><li>Effectively communicate status of repair work with supervisor</li></ul>Successfully contribute toward building a culture of safety through completion of all safety initiatives and demonstrating safe work<ul><li>Complete/attend all safety meetings, computer-based safety training, safety audits, and other safety training as assigned</li><li>Work in a proactive, safe manner in compliance with all safety practices, policies, and training</li><li>Immediately resolve and/or report all safety issues to supervisor</li><li>Maintain a clean and safe work area in compliance with all Contamination Control Initiatives</li></ul>Qualifications:<ul><li>Minimum three years’ experience in troubleshooting and repair of Heavy Construction Equipment, CAT preferred</li><li>Must be computer proficient to be able to run diagnostic software and prepare service communications</li><li>Must have excellent verbal and written communication skills</li><li>Must be able to troubleshoot technical problems, meet or exceed labor repair guidelines, possesses the ability to plan and efficiently complete assigned tasks&nbsp;</li><li>CDL&nbsp;License preferred</li></ul>Physical Requirements:<ul><li>Standing and walking</li><li>Lifting (up to 60lbs.)</li><li>Carrying (up to 50lbs.)</li><li>Push/pull (up to 80lbs.)</li><li>Sitting, rotation and forward bending (sitting and standing)</li><li>Hand coordination and reaching&nbsp;</li><li>Grip (30lbs. with both hands, 80lbs. with preferred/single hand)</li><li>Foot pedal operation</li><li>Climbing stairs and ladders</li><li>Crawling, low work (kneeling), and awkward positioning</li><li>Outdoor work (as required)</li><li>Wearing 10-20lbs. of protective clothing, including fire resistant clothing, welding helmet/shield, &amp; ANSI-rated protective footwear (as required)</li></ul>We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, creed, color, religion, sex, national origin, ancestry, age, marital status, citizenship, sexual orientation, gender or gender status, disability, genetic information, otherwise qualified disabled or veteran status, or any other protected class as designated by Federal, State and/or local law.

H.O. Penn Machinery Company, Inc

Shop Mechanic - Construction Equipment

ABOUT GREYSTARGreystar is a leading, fully integrated global real estate company offering expertise in property management, investment management, development, and construction services in institutional-quality rental housing, logistics, and life sciences sectors. Headquartered in Charleston, South Carolina, Greystar manages and operates more than $320 billion of real estate in 250 markets globally with offices throughout North America, Europe, South America, and the Asia-Pacific region. Greystar is the largest operator of apartments in the United States, manages more than 977,000 units/beds globally, and has a robust institutional investment management platform comprised of more than $78 billion of assets under management, including over $36 billion of development assets. Greystar was founded by Bob Faith in 1993 to become a provider of world-class service in the rental residential real estate business. To learn more, visit <a href="http://www.greystar.com" target="_blank">www.greystar.com</a>. JOB DESCRIPTION SUMMARYThis position performs technical and mechanical work that ensures the physical aspects of the buildings, grounds, amenities, and common areas of the property meet the Company’s standards for cleanliness, appearance, safety, and overall functionality.JOB DESCRIPTION &nbsp;Essential Responsibilities: 1. Completes assigned work orders generated from resident requests for service, as well as preventative maintenance on the property by diagnosing the source or cause of the defect or problem, and making repairs in accordance with established policies, procedures, safety standards, and code requirements.&nbsp;2. Completes the “make-ready” process to prepare vacant apartment homes for leasing and new move-ins by completing the pre-move-out inspection, creating a “punch” list of maintenance work needed, scheduling vendors and contractors as needed, obtaining needed supplies and materials, completing all maintenance tasks, and inspecting completed work.&nbsp;3. Follows procedures for accessing and obtaining materials, supplies, equipment, tools, and other items from the property’s maintenance department by tracking inventory used, returning unused items to the established location, and notifying the maintenance supervisor about re-ordering needs.&nbsp;4. Completes documentation and other paperwork in a timely, accurate, and complete fashion so that service requests can be appropriately documented and tracked.&nbsp;5. Assists in maintaining the grounds, common areas, and amenities by picking up trash and debris, pressure-washing breezeways and pool areas, performing general cleaning, and painting curbs and signage as needed.&nbsp;6. Supports cost-cutting and expense control programs by fixing rather than replacing parts when possible, not being wasteful with materials and supplies, and practicing the correct use for tools and equipment.&nbsp; &nbsp;Other Responsibilities:&nbsp; 1. Complies with Greystar’s safety and risk-management policies by attending and participating in the property’s routine safety meetings, completing required training on OSHA and other safety related laws and requirements, and by reporting accidents and incidents promptly and accurately.&nbsp;2. May periodically inspect work performed by contractors, vendors and other service providers to verify the work, materials and services meet quality standards, scope and specifications as required.&nbsp;Service Technician&nbsp;3. Assists in conducting routine and periodic property inspections to identify safety and risk management concerns, keep the property in good repair, and communicate concerns about the physical needs of the property to management.&nbsp;Required Licenses or Certifications: •&nbsp;&nbsp; &nbsp;Incumbents must have EPA certifications Type 1 and II or Universal for refrigerant recycling. (Applies to Certified Service Technicians.) •&nbsp;&nbsp; &nbsp;Incumbents must have all certifications as required by State and Local jurisdictions. (Applies to all Service Technicians.) •&nbsp;&nbsp; &nbsp;Incumbents must have valid driver’s license to operate a golf cart on property.#LI-HT1The hourly range for this role is $20 - $22.Additional Compensation:<ul><li>Corporate Positions:&nbsp;In&nbsp;addition to the base salary, this role may be eligible to participate&nbsp;in&nbsp;an annual bonus program based on&nbsp;individual and company performance.</li><li>Onsite Property Positions:&nbsp;In&nbsp;addition to the base salary, this role may be eligible to participate&nbsp;in weekly, monthly, and/or quarterly bonus programs.</li></ul>Robust Benefits Offered*:<ul><li>Competitive Medical, Dental, Vision, and Disability &amp; Life&nbsp;insurance benefits. Low (free basic) employee Medical costs for employee-only coverage; costs discounted after 3 and 5 years of service.</li><li>Generous Paid Time off. All new hires start with 15 days of vacation, 4 personal days, 10 sick days, and 10 paid holidays. Plus your birthday off after 1 year of service! Additional vacation accrued with tenure.</li><li>For onsite team members, onsite housing discount at Greystar-managed communities are available subject to discount and unit availability.</li><li>6-Week Paid Sabbatical after 10 years of service (and every 5 years thereafter).</li><li>401(k) with Company Match up to 6% of pay after 6 months of service.</li><li>Paid Parental Leave and lifetime Fertility Benefit reimbursement up to $10,000 (includes adoption or surrogacy).</li><li>Employee Assistance Program.</li><li>Critical Illness, Accident, Hospital&nbsp;Indemnity, Pet&nbsp;Insurance and Legal Plans.</li><li>Charitable giving program and benefits.</li></ul>*Benefits offered for full-time employees. For Union and Prevailing Wage roles, compensation and benefits may vary from the listed&nbsp;information above due to Collective Bargaining Agreements and/or local governing authority.Greystar will consider for employment qualified applicants with arrest and conviction records.CLOSING DATEDecember 22, 2024

Greystar

Maintenance Technician - Nash Springs

ABOUT GREYSTARGreystar is a leading, fully integrated global real estate company offering expertise in property management, investment management, development, and construction services in institutional-quality rental housing, logistics, and life sciences sectors. Headquartered in Charleston, South Carolina, Greystar manages and operates more than $320 billion of real estate in 250 markets globally with offices throughout North America, Europe, South America, and the Asia-Pacific region. Greystar is the largest operator of apartments in the United States, manages more than 977,000 units/beds globally, and has a robust institutional investment management platform comprised of more than $78 billion of assets under management, including over $36 billion of development assets. Greystar was founded by Bob Faith in 1993 to become a provider of world-class service in the rental residential real estate business. To learn more, visit <a href="http://www.greystar.com" target="_blank">www.greystar.com</a>. JOB DESCRIPTION SUMMARYThis position performs technical and mechanical work that ensures the physical aspects of the buildings, grounds, amenities, and common areas of the property meet the Company’s standards for cleanliness, appearance, safety, and overall functionality.JOB DESCRIPTION &nbsp;Essential Responsibilities: 1. Completes assigned work orders generated from resident requests for service, as well as preventative maintenance on the property by diagnosing the source or cause of the defect or problem, and making repairs in accordance with established policies, procedures, safety standards, and code requirements.&nbsp;2. Completes the “make-ready” process to prepare vacant apartment homes for leasing and new move-ins by completing the pre-move-out inspection, creating a “punch” list of maintenance work needed, scheduling vendors and contractors as needed, obtaining needed supplies and materials, completing all maintenance tasks, and inspecting completed work.&nbsp;3. Follows procedures for accessing and obtaining materials, supplies, equipment, tools, and other items from the property’s maintenance department by tracking inventory used, returning unused items to the established location, and notifying the maintenance supervisor about re-ordering needs.&nbsp;4. Completes documentation and other paperwork in a timely, accurate, and complete fashion so that service requests can be appropriately documented and tracked.&nbsp;5. Assists in maintaining the grounds, common areas, and amenities by picking up trash and debris, pressure-washing breezeways and pool areas, performing general cleaning, and painting curbs and signage as needed.&nbsp;6. Supports cost-cutting and expense control programs by fixing rather than replacing parts when possible, not being wasteful with materials and supplies, and practicing the correct use for tools and equipment.&nbsp; &nbsp;Other Responsibilities:&nbsp; 1. Complies with Greystar’s safety and risk-management policies by attending and participating in the property’s routine safety meetings, completing required training on OSHA and other safety related laws and requirements, and by reporting accidents and incidents promptly and accurately.&nbsp;2. May periodically inspect work performed by contractors, vendors and other service providers to verify the work, materials and services meet quality standards, scope and specifications as required.&nbsp;Service Technician&nbsp;3. Assists in conducting routine and periodic property inspections to identify safety and risk management concerns, keep the property in good repair, and communicate concerns about the physical needs of the property to management.&nbsp;Required Licenses or Certifications: •&nbsp;&nbsp; &nbsp;Incumbents must have EPA certifications Type 1 and II or Universal for refrigerant recycling. (Applies to Certified Service Technicians.) •&nbsp;&nbsp; &nbsp;Incumbents must have all certifications as required by State and Local jurisdictions. (Applies to all Service Technicians.) •&nbsp;&nbsp; &nbsp;Incumbents must have valid driver’s license to operate a golf cart on property.#LI-HT1The hourly range for this role is $23 - $24.Additional Compensation:<ul><li>Corporate Positions:&nbsp;In&nbsp;addition to the base salary, this role may be eligible to participate&nbsp;in&nbsp;an annual bonus program based on&nbsp;individual and company performance.</li><li>Onsite Property Positions:&nbsp;In&nbsp;addition to the base salary, this role may be eligible to participate&nbsp;in weekly, monthly, and/or quarterly bonus programs.</li></ul>Robust Benefits Offered*:<ul><li>Competitive Medical, Dental, Vision, and Disability &amp; Life&nbsp;insurance benefits. Low (free basic) employee Medical costs for employee-only coverage; costs discounted after 3 and 5 years of service.</li><li>Generous Paid Time off. All new hires start with 15 days of vacation, 4 personal days, 10 sick days, and 10 paid holidays. Plus your birthday off after 1 year of service! Additional vacation accrued with tenure.</li><li>For onsite team members, onsite housing discount at Greystar-managed communities are available subject to discount and unit availability.</li><li>6-Week Paid Sabbatical after 10 years of service (and every 5 years thereafter).</li><li>401(k) with Company Match up to 6% of pay after 6 months of service.</li><li>Paid Parental Leave and lifetime Fertility Benefit reimbursement up to $10,000 (includes adoption or surrogacy).</li><li>Employee Assistance Program.</li><li>Critical Illness, Accident, Hospital&nbsp;Indemnity, Pet&nbsp;Insurance and Legal Plans.</li><li>Charitable giving program and benefits.</li></ul>*Benefits offered for full-time employees. For Union and Prevailing Wage roles, compensation and benefits may vary from the listed&nbsp;information above due to Collective Bargaining Agreements and/or local governing authority.Greystar will consider for employment qualified applicants with arrest and conviction records.CLOSING DATEDecember 22, 2024

1,001 Technician Jobs