field_job_employment_type

job_industry

field_job_occupational_field_parents_all

job_organization_name

Company Description About Veolia North America A subsidiary of Veolia Group, Veolia North America (VNA) offers a full spectrum of water, waste and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. VNA helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Mass., Veolia North America has approximately 10,000 employees working at more than 350 locations across the continent. Please visit our website <a href="http://www.veolianorthamerica.com" target="_blank">www.veolianorthamerica.com</a> Job Description Targeted Hourly Pay: minimum of $29 to a maximum of $33 BENEFITS Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental and vision insurance. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. Sick leave - 56 hours Observed Holidays - 11 days Vacation - 15 days Eligible for up to 4% Annual Performance Bonus Posting is short term (e.g. 6 months or less.) Position Purpose: Responsible for safely transporting hazardous and non-hazardous materials from the customer site to the appropriate designated sites using van trailers, straight trucks, flatbeds, tankers, roll-off frames, or other waste carrying equipment. Ensures that the condition of the material packaging meets the U.S. Department of Transportation (DOT) specifications, inspects manifests and shipping paperwork for accuracy, and maintains current transportation permits for all areas traveled. Abides by all regulations set forth by DOT, EPA, state and local governments, and VES-TS policies and procedures. Primary Duties/responsibilities: <ul><li>Perform daily inspections of vehicle and/or trailer prior to driving to ensure the safety and integrity of equipment going to designated sites.</li><li>Prior to transporting materials reviews shipment records, manifests, container labeling, vehicle placards, and integrity of loaded drums, roll-off boxes or bulk tankers.</li><li>Ensure that DOT requirements such as load weight limits, driver log books, Vehicle Inspection Records, transportation permits, insurance cards, fuel trip reports, IFTA fuel stickers, or other paperwork is up to date and valid.</li><li>Consults with customers pertaining to load conditions, drum counts or paperwork inconsistencies to ensure that materials can be properly transported to designated site(s).</li><li>Notify immediate supervisor of any moving violations and/or accidents in-route to and/or from sites.</li><li>Assist in the loading/unloading of materials at designated sites utilizing appropriate equipment.</li><li>Responsible for assisting with housekeeping as required.</li><li>Other duties as assigned</li></ul> Qualifications Education / Experience / Background: <ul><li>High School diploma or General Educational Development (GED) required</li><li>Prior commercial driving experience required</li></ul> Knowledge / Skills / Abilities: <ul><li>Familiarity with U.S. Department of Transportation (DOT) regulations pertaining to the transportation of hazardous and non-hazardous materials</li><li>Strong team player</li><li>Excellent interpersonal and communication skills</li><li>Time management: the ability to organize and manage multiple tasks</li><li>Strong customer service orientation</li></ul> Required Certification / Licenses / Training: <ul><li>Valid Class A Commercial Driving License (CDL) required</li><li>Hazmat (H) endorsement required</li><li>40-Hour HAZWOPER training preferred</li></ul> Additional Information We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Regional Driver

ABOUT ROCKET LABRocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. &nbsp;Join our pioneering team and launch your career to new heights!NEUTRON Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab’s proven execution history with the Electron program.&nbsp;COMPOSITE TECHNICIAN I-IVWe are currently seeking a Composite Technicians at several experience levels to join our team. Technicians will be based out of Rocket Lab's newest Space Structures Complex production facility in Middle River, MD. The Composite Technicians will be responsible for the build and assembly of Composite components used in the production of the Neutron Launch Vehicle structure.&nbsp;WHAT YOU’LL GET TO DO:&nbsp;&nbsp;<ul><li>Assembly of structures including setup, bonding and fastener applications&nbsp;</li><li>Laminate assemblies by determining proper placement of composite materials&nbsp;</li><li>Prepare parts for bagging, including placement of bleeders, thermocouples, probes and vacuum connections&nbsp;</li><li>Vacuum bag processing, bonding, and oven/autoclave curing&nbsp;</li><li>Making basic layouts on parts or assemblies in order to establish reference points and to check dimensions using calipers, micrometers, precision scales and torque wrenches&nbsp;</li><li>Fitting of Honeycomb, foam and syntactic core&nbsp;&nbsp;</li><li>Fitting and refurbishment of thermal protection systems.&nbsp;&nbsp;</li><li>Integration of mechanical hardware&nbsp;&nbsp;&nbsp;</li><li>Perform other standard composite and integration building techniques and practices as industries such as aerospace, space and other composite workplaces demand.&nbsp;&nbsp;</li><li>You may be requested to work on other products for Rocket Lab in the local area or travel as required.&nbsp;</li></ul>This requisition can be hired at a Technician Level I, II, III or IV.&nbsp;&nbsp;&nbsp;YOU’LL BRING THESE QUALIFICATIONS FOR COMPOSITE TECH I:&nbsp;&nbsp;<ul><li>Minimum 1+ years of experience in composite or lamination experience OR&nbsp;</li><li>2+ years of military equipment maintenance experience OR&nbsp;</li><li>2+ years of experience in electronics, mechanical troubleshooting, installation, repair of manufacturing equipment&nbsp;</li><li>High School Diploma or GED&nbsp;&nbsp;</li><li>Basic Math Skills&nbsp;</li><li>Knowledge of the following tool use (or if no previous experience, open to training on):&nbsp;<ul><li>Pneumatic tools&nbsp;</li><li>Caliper&nbsp;</li><li>Micrometers&nbsp;</li><li>Hand tools&nbsp;</li><li>Power tools&nbsp;</li><li>Precision measurement instruments&nbsp;</li><li>familiarity working with and conforming to drilling, laminating, and assembly prints&nbsp;</li><li>Experience working with material data sheets&nbsp;</li></ul></li><li>Shop organization and cleanliness&nbsp;</li><li>Use of personal protective equipment&nbsp;</li></ul>YOU’LL BRING THESE QUALIFICATIONS FOR COMPOSITE TECH II:&nbsp;&nbsp;<ul><li>Minimum 3+&nbsp; years of experience &nbsp;in composite or lamination experience OR&nbsp;</li><li>4+ years of military equipment maintenance experience OR&nbsp;</li><li>4+ years of experience in electronics, mechanical troubleshooting, installation, repair of manufacturing equipment&nbsp;</li><li>High School Diploma or GED&nbsp;&nbsp;</li><li>Must be certified or able to become certified in two composite work centers&nbsp;</li><li>Intermediate Math Skills&nbsp;</li><li>Experience in the use of the following tools to achieve complex composite assemblies:&nbsp;<ul><li>Pneumatic tools&nbsp;</li><li>Caliper&nbsp;</li><li>Micrometers&nbsp;</li><li>Hand tools&nbsp;</li><li>Power tools&nbsp;</li><li>Precision measurement instruments&nbsp;</li><li>familiarity working with and conforming to drilling, laminating, and assembly prints&nbsp;</li><li>Experience working with material data sheets&nbsp;</li></ul></li><li>Shop organization and cleanliness&nbsp;</li><li>Use of personal protective equipment&nbsp;</li></ul>YOU’LL BRING THESE QUALIFICATIONS FOR COMPOSITE TECH III:&nbsp;&nbsp;&nbsp;<ul><li>Minimum 6+&nbsp; years of experience &nbsp;in composite or lamination experience OR&nbsp;&nbsp;</li><li>7+ years of military equipment maintenance experience OR&nbsp;</li><li>7+ years of experience in electronics, mechanical troubleshooting, installation, repair of manufacturing equipment&nbsp;</li><li>High School Diploma or GED&nbsp;&nbsp;</li><li>Must be certified or able to become certified in all composite work centers&nbsp;</li><li>Intermediate Math Skills&nbsp;</li><li>Significant on the job experience of the following tool use to achieve complex composite assemblies:&nbsp;<ul><li>Pneumatic tools&nbsp;</li><li>Caliper&nbsp;</li><li>Micrometers&nbsp;</li><li>Hand tools&nbsp;</li><li>Power tools&nbsp;</li><li>Precision measurement instruments&nbsp;</li><li>familiarity working with and conforming to drilling, laminating, and assembly prints&nbsp;</li><li>Experience working with material data sheets&nbsp;</li></ul></li><li>Shop organization and cleanliness&nbsp;</li><li>Use of personal protective equipment&nbsp;</li></ul>YOU’LL BRING THESE QUALIFICATIONS FOR COMPOSITE TECH IV:&nbsp;&nbsp;&nbsp;<ul><li>Minimum 12+ years of experience in composite or lamination experience OR&nbsp;&nbsp;</li><li>13+ years of military equipment maintenance experience OR&nbsp;</li><li>13+ years of experience in electronics, mechanical troubleshooting, installation, repair of manufacturing equipment&nbsp;</li><li>High School Diploma or GED&nbsp;&nbsp;</li><li>Must be certified or able to become certified in all composites work centers&nbsp;</li><li>Intermediate Math Skills&nbsp;</li><li>Experience training and mentoring newer composite technicians on industry standards and specific processes&nbsp;<ul><li>Expert knowledge of the following tool use and demonstrated capability to apply them to achieve complex composite assemblies:&nbsp;</li><li>Pneumatic tools&nbsp;</li><li>Caliper&nbsp;</li><li>Micrometers&nbsp;</li><li>Hand tools&nbsp;</li><li>Power tools&nbsp;</li><li>Precision measurement instruments&nbsp;</li><li>familiarity working with and conforming to drilling, laminating, and assembly prints&nbsp;</li><li>Experience working with material data sheets&nbsp;</li></ul></li><li>Shop organization and cleanliness&nbsp;</li><li>Use of personal protective equipment&nbsp;</li></ul>THESE QUALIFICATIONS WOULD BE NICE TO HAVE:&nbsp;&nbsp;<ul><li>Experienced in Core bond and Splicing&nbsp;</li><li>Broad Industry manufacturing experience from previous appointments&nbsp;</li><li>1+ years composite experience (aerospace industry experience preferred)&nbsp;</li><li>Advanced Prepreg manufacturing knowledge&nbsp;&nbsp;&nbsp;</li><li>Resin infusion knowledge&nbsp;&nbsp;&nbsp;</li></ul>ADDITIONAL REQUIREMENTS:&nbsp;<ul><li>Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position&nbsp;</li><li>Able to lift up to 25lbs. unassisted&nbsp;</li><li>Must be able to climb ladders and be comfortable working in tight spaces.&nbsp;</li><li>Must be able to move repetitively, bend or twist, and use hands to handle, control, or feel objects, tools or controls.&nbsp;</li><li>Must be able to walk or stand for extended periods – 8 hours min &nbsp;</li><li>Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces &nbsp;</li></ul>Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.Base salary is just one component of our total rewards package at Rocket Lab.&nbsp; Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO &amp; a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: discounted employee stock purchase program, and free snacks/drinks onsite.Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company’s discretion.Base Pay Range (MD Only)$21.39—$44.23 USDWHAT TO EXPECT&nbsp;We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.&nbsp;&nbsp;&nbsp;Important information:FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here.Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at <a href="mailto:g.biow@rocketlabusa.com.This" target="_blank">g.biow@rocketlabusa.com.This</a> dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:For security reasons background checks will be undertaken prior to any employment offers being made to an applicant.&nbsp; These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.&nbsp;Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality.&nbsp; For more information on these Regulations, click here&nbsp;ITAR Regulations.

Rocket Lab

Composite Technician I-IV

ABOUT ROCKET LABRocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. &nbsp;Join our pioneering team and launch your career to new heights!NEUTRONNeutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab’s proven execution history with the Electron program.&nbsp;SENIOR FABRICATION TECHNICIANThe Senior Fabrication Technician is a critical team member responsible for leading the fabrication processes, ensuring high-quality outputs, and optimizing production efficiency. This role involves working with various materials, tools, and technologies to create custom parts and components as per specifications, including painting, custom fabrication work, and supporting all aspects of vehicle build, integration, and GSE (Ground Support Equipment) repair and fabrication. The candidate must have experience in the aerospace industry.&nbsp;WHAT YOU'LL GET TO DO:<ul><li>&nbsp;Oversee and execute fabrication tasks, including cutting, welding, machining, painting, and assembling materials and components.</li><li>Read and interpret blueprints, schematics, and technical drawings to ensure accurate production.</li><li>Operate and maintain fabrication machinery and equipment, ensuring safety and efficiency.</li><li>Perform custom fabrication work, tailoring projects to specific requirements and customer needs.</li><li>Collaborate with engineers, designers, and other technicians to optimize fabrication processes and solve technical issues.</li><li>Support the repair and fabrication of GSE (Ground Support Equipment), ensuring functionality and reliability.</li><li>Support all aspects of vehicle build, integration, and GSE.</li><li>Join other manufacturing teams on an as-needed basis.</li><li>Support mechanical assembly, vehicle integration, and composites when needed.</li><li>Inspect finished products for quality and adherence to specifications, making adjustments as necessary.</li><li>Maintain a clean and organized work environment, adhering to all safety regulations and protocols.</li><li>Attend group meetings and provide ideas on how to overcome challenges through alternative methods.</li><li>Continuously seek opportunities for process improvements and cost-saving measures.</li><li>Other duties as assigned.&nbsp;</li></ul>&nbsp;&nbsp;YOU'LL BRING THESE QUALIFICATIONS FOR SENIOR FABRICATION TECHNICIAN:<ul><li>High school diploma or equivalent; technical degree or certification in fabrication or related field preferred.</li><li>Minimum of 15 years of experience in a fabrication or manufacturing environment.</li><li>Proficiency in operating fabrication tools and machinery, including CNC machines, welding equipment, saws, manual mills and lathes, and various shop tools (e.g., sanders, cutters, bandsaws, table saws).</li><li>Strong understanding of materials science and properties, particularly metals and composites.</li><li>Excellent problem-solving skills and attention to detail.</li><li>Experience in painting, custom fabrication work, and GSE repair and fabrication.</li><li>Proficiency in MIG and TIG welding techniques.</li><li>Experience with metal and composite fabrication/repair.</li><li>Ability to paint as needed.</li><li>Experience in the aerospace industry.</li><li>Desired experience: A&amp;P Certification (Airframe and Powerplant).</li><li>Ability to work independently and as part of a team.</li><li>Strong communication and interpersonal skills.</li><li>Commitment to safety and quality standards.&nbsp;</li></ul>ADDITIONAL REQUIREMENTS:&nbsp;<ul><li>Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position&nbsp;</li><li>Able to lift up to 25lbs. unassisted&nbsp;</li><li>Must be able to climb ladders and be comfortable working in tight spaces.&nbsp;</li><li>Must be able to move repetitively, bend or twist, and use hands to handle, control, or feel objects, tools or controls.&nbsp;</li><li>Must be able to walk or stand for extended periods – 8 hours min &nbsp;</li><li>Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces </li></ul>Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.Base salary is just one component of our total rewards package at Rocket Lab.&nbsp; Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO &amp; a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, childcare concierge, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company’s discretion.Base Pay Range (CA Only)$107,000—$133,800 USDWHAT TO EXPECT&nbsp;We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.&nbsp;&nbsp;&nbsp;Important information:FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here.Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at <a href="mailto:g.biow@rocketlabusa.com.This" target="_blank">g.biow@rocketlabusa.com.This</a> dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:For security reasons background checks will be undertaken prior to any employment offers being made to an applicant.&nbsp; These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.&nbsp;Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality.&nbsp; For more information on these Regulations, click here&nbsp;ITAR Regulations.

Senior Fabrication Technician

You Lead the Way. We’ve Got Your Back.With the right backing, people and businesses have the power to progress in incredible ways. When you join Team Amex, you become part of a global and diverse community of colleagues with an unwavering commitment to back our customers, communities and each other. Here, you’ll learn and grow as we help you create a career journey that’s unique and meaningful to you with benefits, programs, and flexibility that support you personally and professionally.At American Express, you’ll be recognized for your contributions, leadership, and impact—every colleague has the opportunity to share in the company’s success. Together, we’ll win as a team, striving to uphold our company values and powerful backing promise to provide the world's best customer experience every day. And we’ll do it with the utmost integrity, and in an environment where everyone is seen, heard and feels like they belong.Join Team Amex and let's lead the way together.As part of our diverse tech team, you can architect, code and ship software that makes us an essential part of our customers’ digital lives. Here, you can work alongside dedicated engineers in an open, supportive, inclusive environment where your voice is valued, and you make your own decisions on what tech to use to solve ambitious problems. American Express offers a range of opportunities to work with the newest technologies and encourages you to back the broader engineering community through open source. And because we understand the importance of keeping your skills relevant, we give you dedicated time to invest in your professional development. Find your place in technology of #TeamAmex.How will you make an impact in this role?Responsible performing advanced-level operations, maintenance, solving and performance testing, including “base building” and data processing specific components and systems, in associated data center infrastructure field. Collaborates with leadership, Project Managers, customers and strategic partners to address business priorities, new products or services, and performs advanced problem solving, which requires good judgment and quick action. Reports to DCI Manager and or takes direction from Senior DCI Technician.<ul><li>Monitors Data Hall equipment and systems. Perform adjustments to operating parameters to ensure efficiency and reliability</li><li>Respond to equipment failures and system alarms. Stabilize and perform corrective actions to maintain 100% availability</li><li>Complete frequency based infrastructure maintenance tasks</li><li>Build detailed maintenance and fixing procedures</li><li>Apply expertise and experience to analyze various data center component and system configurations to optimize performance</li><li>Examine failures for trends and contributing factors, developing and/or performing corrective actions independently</li><li>Apply sophisticated data capture, monitoring and recording equipment to analyze data; make timely and effective decisions; provide recommendations to leadership; and implement solutions</li><li>Respond to Service Requests (SR) and Incident Management Reports (IMR)</li><li>Install equipment and terminate cables while working in proximity to hazardous electrical voltages</li><li>Install, terminate and attach network cables without interrupting adjacent business-critical connections</li><li>Raise data center availability risks to DCI leadership</li><li>Supports leaders in designing and implementing policy, standards and procedures</li><li>Cross-train and/or mentor technicians /peers in relevant skills to support succession planning</li><li>Lead in-house and vendor resources and supervise and lead workflow queues</li></ul>Minimum Qualifications<ul><li>High School or equivalent experience</li><li>Experience in a data center environment</li></ul>Preferred Qualifications<ul><li>Certification - Equipment Manufacturers Factory or site-specific training</li><li>Experience in the associated infrastructure field, e.g. electrical, electronics, mechanical, data processing hardware, telecommunications and/or networks, BICSI Installer 1 certification</li><li>Sophisticated knowledge of EIA/TIA cabling standards and quality practices and able to accurately perform cable testing/ certification</li><li>Advanced knowledge of infrastructure or data processing based systems and equipment, with proven analytical, problem solving and decision making skills</li><li>General solid understanding of Microsoft Office Suite desktop application</li><li>System/Platform Domain Knowledge</li></ul>Salary Range: $30.93 to $46.40 hourly + bonus + benefitsThe above represents the expected hourly pay range for this job requisition. Ultimately, in determining your pay, we’ll consider your location, experience, and other job-related factors.We back our colleagues and their loved ones with benefits and programs that support their holistic well-being. That means we prioritize their physical, financial, and mental health through each stage of life. Benefits include:<ul><li>Competitive base salaries&nbsp;</li><li>Bonus incentives&nbsp;</li><li>6% Company Match on retirement savings plan&nbsp;</li><li>Free financial coaching and financial well-being support&nbsp;</li><li>Comprehensive medical, dental, vision, life insurance, and disability benefits&nbsp;</li><li>Flexible working model with hybrid, onsite or virtual arrangements depending on role and business need&nbsp;</li><li>20+ weeks paid parental leave for all parents, regardless of gender, offered for pregnancy, adoption or surrogacy&nbsp;</li><li>Free access to global on-site wellness centers staffed with nurses and doctors (depending on location)&nbsp;</li><li>Free and confidential counseling support through our Healthy Minds program&nbsp;</li><li>Career development and training opportunities</li></ul>For a full list of Team Amex benefits, visit our Colleague Benefits Site.American Express is an equal opportunity employer and makes employment decisions without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, disability status, age, or any other status protected by law.We back our colleagues with the support they need to thrive, professionally and personally. That's why we have Amex Flex, our enterprise working model that provides greater flexibility to colleagues while ensuring we preserve the important aspects of our unique in-person culture. Depending on role and business needs, colleagues will either work onsite, in a hybrid model (combination of in-office and virtual days) or fully virtually.US Job Seekers/Employees -&nbsp;Click here&nbsp;to view the “EEO is the Law” poster and supplement and the&nbsp;Pay Transparency Policy Statement.If the links do not work, please copy and paste the following URLs in a new browser window:&nbsp;<a href="https://www.dol.gov/agencies/ofccp/posters&nbsp;to" target="_blank">https://www.dol.gov/agencies/ofccp/posters&nbsp;to</a> access the three posters.Employment eligibility to work with American Express in the United States is required as the company will not pursue visa sponsorship for these positions.

American Express

DCI Technician

Howmet Aerospace, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. The Company’s primary businesses focus on jet engine components, aerospace fastening systems and titanium structural parts necessary for mission-critical performance and efficiency in aerospace and defense applications, as well as forged wheels for commercial transportation. Howmet Aerospace is transforming the next phase of more fuel-efficient, quieter aerospace engines and sustainable ground transportation. For more information, visit&nbsp;<a>www.howmet.com</a>.&nbsp;Follow @howmet: Twitter, Instagram, Facebook, LinkedIn and YouTube. This 1st shift&nbsp;DEVELOPMENT TECHNICIAN&nbsp;position will be located in our Research and Development Facility.&nbsp; Primary responsibilities will include: <ul><li>Assist with processes in a rapid tooling lab, as well as in the manufacturing of prototype ceramic cores and wax patterns</li><li>Process prototype parts as required to meet customer requirements</li><li>Operate equipment in a rapid prototyping tooling environment, both subtractive (CNC) and additive (3D printing) in nature.&nbsp;</li><li>Responsible for standardizing/documenting procedures</li><li>Work closely with engineering and other technicians, with a common goal of producing quick turn core, pattern and casting solutions in support of both internal and external development projects.&nbsp;</li><li>Communicate with numerous groups and juggle priorities in fast paced environment.&nbsp;</li><li>Performs and documents a variety of preventative maintenance and troubleshooting activities, as required.&nbsp;</li><li>Complies with all EHS rules required for the work environment.</li></ul> BASIC QUALIFICATIONS <ul><li>Associate degree in manufacturing industrial or mechanical technology from an accredited institution plus 3 years of machining and fabrication of fixtures, tooling, and custom components; OR high school/GED with 10+ years of experience of machining and fabrication of fixtures, tooling, and custom components.</li><li>Employees must be legally authorized to work in the United States.&nbsp; Verification of employment eligibility will be required at the time of hire.&nbsp; Visa sponsorship is not available for this position.</li></ul> PREFERRED QUALIFICATIONS <ul><li>2+ years experience working in an engineering or manufacturing environment</li><li>Able to work in a team environment</li><li>Self-starter, needing little supervision </li><li>Strong work ethic </li><li>Injection molding experience</li><li>Problem solving abilities</li><li>Comfortable using various basic windows based software, such as excel and word.</li><li>Exceptional attention to detail</li><li>Strong math/mechanical aptitude </li></ul> Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $6.6 billion in revenue in 2023, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2023 Environmental Social and Governance report at&nbsp;<a>www.howmet.com/esg-report</a>. Follow: <a>LinkedIn</a>, <a>Twitter</a>, <a>Instagram</a>, <a>Facebook</a>, and <a>YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Howmet Aerospace

DEVELOPMENT TECHNICIAN

<h4>How you will change lives</h4>As a Patient Care Technician (PCT) at US Renal Care, you will be an integral part of a cross-functional team providing care and delegated activities of treatment to patients. The PCT will work under the supervision of a Registered Nurse (RN) or Charge Nurse (CN) for patients with renal failure.<h4>What you'll be doing</h4>Patient care. You will work directly with patients to provide safe, comfortable, and high-quality dialysis treatment. Responsibilities include gathering patient stats before and after treatment, initiating treatment, monitoring patients during treatment, terminating treatment, and collecting patient blood samples per physician orders.Technician Duties. You will ensure quality comes first by preparing machines for hemodialysis treatments, cleaning and disinfecting machines after treatment, and conducting machine safety checks and logging results for quality control, ensuring all protocols and regulations are followed.Safety and Quality. You will use appropriate safety measures, including personal protective equipment. Working under the supervision of a Charge Nurse, you will adhere to all company policies, procedures, and state/federal laws and regulations. You will participate in all required staff meetings and continuing education offerings.PATIENT CARE TECHNICIAN STATE SPECIFIC BOARD OF NURSING REQUIREMENTS California<ul><li>Must possess current Certified Hemodialysis Technician (CHT) certificate from California Department of Public Health (CDPH) at time of hire OR</li><li>Hired at USRC location recognized by state of California as an approved dialysis technician training program and obtain California state certification (CHT) within six (6) weeks of successful completion of training program. </li></ul>Maryland<ul><li>Must possess current Certified Nursing Assistants -- Dialysis Technicians (CNA-DT) certificate from Maryland Board of Nursing OR</li><li>Hired at USRC location recognized by state of Maryland as an approved dialysis technician training program and obtain Maryland CNA-DT certificate within three (3) months from date of hire OR</li><li>Out-of-state applicant must have active BONENT certification and provide proof of initial application for CNA-DT certification.</li></ul>New Mexico<ul><li>Must have New Mexico dialysis technician certificate at time of hire OR</li><li>Hired at USRC location recognized by state of New Mexico as an approved dialysis technician training program and obtain New Mexico state certification within six (6) months of successful completion of training program OR</li><li>New Mexico certification of hemodialysis technician is required for out of state applicant with active state or national hemodialysis certification; must obtain New Mexico state certification prior to working as a Certified Hemodialysis Technician. </li><li>After January 1st, 2024, all initial applications for the certified hemodialysis technician will require a national hemodialysis technician certificate.</li><li>The applicant must submit proof of a valid national hemodialysis technician certificate from a recognized organization.</li><li>Hemodialysis technician students must have a current basic life support credential prior to and while the student has contact with patients</li></ul>OHIO<ul><li>Must have Ohio dialysis technician intern certificate at time of hire OR</li><li>Hired at USRC location recognized by state of Ohio as an approved dialysis technician training program and submit application for Ohio dialysis technician intern certificate to board no later than four (4) weeks prior to completion of the approved training program.</li><li>Must obtain Ohio Board of Nursing Certificate (OCDT) not less than twelve (12) months and not later than eighteen (18) months of enrolling in the USRC OCDT program.</li></ul>OREGON<ul><li>Must possess current Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division at time of hire OR</li><li>Must obtain Oregon dialysis technician provisional certificate within three (3) weeks of successful completion of training program and obtain Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division within eighteen (18) months. An Oregon Provisional Certification is valid for six months and can be renewed for one additional six month period.</li></ul>&nbsp;

U.S. Renal Care

Dialysis Patient Care Technician

<h4>How you will change lives</h4>As a Patient Care Technician (PCT) at US Renal Care, you will be an integral part of a cross-functional team providing care and delegated activities of treatment to patients. The PCT will work under the supervision of a Registered Nurse (RN) or Charge Nurse (CN) for patients with renal failure.<h4>What you'll be doing</h4>Patient care. You will work directly with patients to provide safe, comfortable, and high-quality dialysis treatment. Responsibilities include gathering patient stats before and after treatment, initiating treatment, monitoring patients during treatment, terminating treatment, and collecting patient blood samples per physician orders.Technician Duties. You will ensure quality comes first by preparing machines for hemodialysis treatments, cleaning and disinfecting machines after treatment, and conducting machine safety checks and logging results for quality control, ensuring all protocols and regulations are followed.Safety and Quality. You will use appropriate safety measures, including personal protective equipment. Working under the supervision of a Charge Nurse, you will adhere to all company policies, procedures, and state/federal laws and regulations. You will participate in all required staff meetings and continuing education offerings.Position located in Mansfield, TXPATIENT CARE TECHNICIAN STATE SPECIFIC BOARD OF NURSING REQUIREMENTS California<ul><li>Must possess current Certified Hemodialysis Technician (CHT) certificate from California Department of Public Health (CDPH) at time of hire OR</li><li>Hired at USRC location recognized by state of California as an approved dialysis technician training program and obtain California state certification (CHT) within six (6) weeks of successful completion of training program. </li></ul>Maryland<ul><li>Must possess current Certified Nursing Assistants -- Dialysis Technicians (CNA-DT) certificate from Maryland Board of Nursing OR</li><li>Hired at USRC location recognized by state of Maryland as an approved dialysis technician training program and obtain Maryland CNA-DT certificate within three (3) months from date of hire OR</li><li>Out-of-state applicant must have active BONENT certification and provide proof of initial application for CNA-DT certification.</li></ul>New Mexico<ul><li>Must have New Mexico dialysis technician certificate at time of hire OR</li><li>Hired at USRC location recognized by state of New Mexico as an approved dialysis technician training program and obtain New Mexico state certification within six (6) months of successful completion of training program OR</li><li>New Mexico certification of hemodialysis technician is required for out of state applicant with active state or national hemodialysis certification; must obtain New Mexico state certification prior to working as a Certified Hemodialysis Technician. </li><li>After January 1st, 2024, all initial applications for the certified hemodialysis technician will require a national hemodialysis technician certificate.</li><li>The applicant must submit proof of a valid national hemodialysis technician certificate from a recognized organization.</li><li>Hemodialysis technician students must have a current basic life support credential prior to and while the student has contact with patients</li></ul>OHIO<ul><li>Must have Ohio dialysis technician intern certificate at time of hire OR</li><li>Hired at USRC location recognized by state of Ohio as an approved dialysis technician training program and submit application for Ohio dialysis technician intern certificate to board no later than four (4) weeks prior to completion of the approved training program.</li><li>Must obtain Ohio Board of Nursing Certificate (OCDT) not less than twelve (12) months and not later than eighteen (18) months of enrolling in the USRC OCDT program.</li></ul>OREGON<ul><li>Must possess current Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division at time of hire OR</li><li>Must obtain Oregon dialysis technician provisional certificate within three (3) weeks of successful completion of training program and obtain Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division within eighteen (18) months. An Oregon Provisional Certification is valid for six months and can be renewed for one additional six month period.</li></ul>&nbsp;

Dialysis Patient Care Technician-CCHT

Job Title:&nbsp;Test Technician APay Range:&nbsp;$74.75&nbsp;-$83.04Join the Clean Energy RevolutionBecome a&nbsp;Test Technician A&nbsp;at Southern California Edison (SCE) and build a better tomorrow. In this job, you will supervise, test, inspect, repair, and adjust relays, meters and associated devices for protection and operation of lines, buses, generators, motors, transformers, and regulators for voltages up to and including 220KV. As a&nbsp;Test Technician A, your work will help power our planet, reduce carbon emissions and create cleaner air for everyone. Are you ready to take on the challenge to help us build the future?Responsibilities<ul><li>Set up and operate test instruments and equipment to perform operational testing, adjustment and calibration of generation and substation protection, measuring, controlling, and recording systems and equipment</li><li>Perform testing and maintenance on a wide variety of generating technologies and locations across the Western Operations area of responsibility, including 100+ year old Hydro generation facilities in the Big Creek, Tule, Kaweah, and Kern river watersheds.</li><li>Track equipment maintenance and assures equipment is maintained accordingly as needed or scheduled. Initiates and implements corrective actions relative to protection of systems and controls. Have the responsibility for testing and in service testing of system equipment.</li><li>Plan, program, perform minor design modifications, lay out test work and coordinates work with other workers.</li><li>Use software programs utilized in programming, testing, inspecting, repairing, and adjusting system equipment.</li><li>Maintain, modify or revise electrical drawings and required documentation.</li></ul>Minimum Qualifications<ul><li>Advanced electrical, electronic, digital, and analog theory experience and/or formal training in electrical engineering.</li><li>Three or more years of experience performing work requiring extensive comprehension of electrical theory and use of principles of electrical theory.</li><li>Three or more years of experience installing, testing, repairing, maintaining electrical protective equipment</li><li>Valid CA driver’s license.</li></ul>Preferred Qualifications<ul><li>Completion of Test Technician training program (i.e. Relay Technician, Field Engineer, etc.)</li><li>Experience modifying, revising, and creating electrical prints utilizing AutoCAD Software</li><li>Qualified high voltage worker</li><li>Experience working with SAP, Microsoft Word and Excel</li><li>Project Management experience.</li><li>Experience working with Emerson Ovation Control Systems</li><li>Experience working with GE Mark VI Control Systems</li></ul>Additional Information<ul><li>Visit our&nbsp;Candidate Resource&nbsp;page to get meaningful information related to benefits, perks, resources, testing information, hiring process, and more!</li><li>Qualified applications with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act.&nbsp;</li></ul><ul><li>Position will require up to&nbsp;30%&nbsp;traveling and being out in the field throughout the&nbsp;SCE service territory.&nbsp;</li></ul><ul><li>This position has been identified as a NERC/CIP impacted position - Prior to being hired, the successful candidate must pass a Personnel Risk Assessment (PRA) or Background Investigation.&nbsp; Once hired, the candidate must complete specified training prior to gaining un-escorted access to assigned work location and performing necessary job duties.</li></ul><ul><li>Relocation may apply to this position.</li></ul><ul><li>This position requires testing and applicants who are identified to continue through the selection process will be invited to test via email. Reference our&nbsp;Information Guides&nbsp;for the following tests:&nbsp;&nbsp;Test Technician A Hydro&nbsp;(Test #2737).&nbsp; Candidates who have previously passed these assessment(s), in some cases, may not need to retest again for this position.</li></ul>About Southern California EdisonThe people at SCE don't just keep the lights on. Our mission is so much bigger. We’re fueling the kind of innovation that’s changing an entire industry, and quite possibly the planet. Join us and create a future with cleaner energy, while providing our customers with the safety and reliability they demand. At SCE, you’ll have a chance to grow personally and professionally, making a real impact in Southern California and around the world.

Southern California Edison

Test Technician A

<h4>Thank you for your interest in a career at NeighborHealth, formerly East Boston Neighborhood Health Center!</h4>Everywhere you turn, you can feel the immeasurable level of enthusiasm here at NeighborHealth! We are one of the largest community health centers in the country, supporting the greater Boston area and focusing on the well-being of our patients and local community. From the nurses and physicians on the front line of patient care, to the managers who lead and guide our staff, to the many support roles that keep our facilities running smoothly - everyone plays a vital role in improving medicine for our patients.Interested in this position? Apply online and create a personal candidate account!Current Employees of NeighborHealth- Please use our internal careers portal to apply for positions.To learn more about working at NeighborHealth and our benefits, please visit out our Careers Page.Time Type: Part timeDepartment: Retail Pharmacy - MaverickAll Locations: 20 Maverick Square – Cradock BuildingPosition Summary: The Pharmacy Technician is responsible for providing support and assistance to clinical staff in the management of medication ordering and delivery.$2,500 sign on bonus for new full-time Pharm Techs! (prorated for part-time and per diem)<ul><li>Communicates among a number of individuals, including patients, co-workers, insurance companies and prescribers.</li><li>Demonstrates compassion and care by proactively identifying and resolving potential problems.</li><li>Works on a team to fulfill prescription orders from start to finish with an in-depth understanding of each workstation.</li><li>Understands and follows applicable Federal and State laws (e.g. HIPAA), regulations , professional stands, and ethical principles.</li><li>As allowable by state law, certified and trained pharmacy technicians can expand on their clinical and managerial responsibilities.</li><li>Displays outstanding customer service skills when interacting with patients, outside providers, referral sources or others.</li><li>Responsible for continued professional growth and development.&nbsp;&nbsp;</li></ul><ul><li>Other Duties &amp; Responsibilities</li><li>Reads, understands and complies with all Standards of Conduct, JCAHO policies, etc.</li><li>Adheres to NeighborHealth standards of Employee Conduct and all related policies and procedures by:</li><li>Demonstrating excellent customer service;</li><li>Showing respect to other employees;</li><li>Adhering to standards of cultural competency and non-discrimination;</li><li>Adhering to standards of privacy;</li><li>Adhering to attendance and other policies and utilizing appropriate notification and other procedures.</li><li>Upholds safety policies, practices, and procedures including safety, fire safety, electrical safety, proper body mechanics and material handling, office/ergonomic safety and other employee safety measures.</li><li>Upholds procedures and systems to safeguard the confidentiality of all patient and employee information.&nbsp;</li></ul><ul><li>Knowledge, Skills, and Abilities Required: </li><li>Education: High School graduate or GED required. Current valid and unrestricted pharmacy technician license from the Massachusetts Board of Registration in Pharmacy.</li><li>Experience: Must have completed Pharmacy Technician Trainee requirements.</li><li>Skills/Abilities: Ability to work on a team in a fast-paced environment. Excellent communication skills in English as well as basic reading and math skills.Computer proficiency with an electronic medical record.Commitment to exceptional customer service.</li></ul>Pay Rate: Starting at $21.58, and up to $30.10 based on experience

Pharmacy Technician

Job Title Animal Care Technician I Requisition Number RE49046 Working Title Department Name 40832:Laboratory Animal Resources Work Location Lexington, KY Grade Level 40 Salary Range $15.30-24.50/hour Type of Position Staff Position Time Status Full-Time Required Education HS Click here for more information about equivalencies: <a href="https://hr.uky.edu/employment/working-uk/equivalencies" target="_blank">https://hr.uky.edu/employment/working-uk/equivalencies</a> Required Related Experience 1 yr Required License/Registration/Certification None. Physical Requirements Requires heavy lifting, pushing or pulling of objects over 50 pounds; animal handling; mice, rats, pigeons, dogs, monkeys (including carcasses); risk of injuries from use of equipment on the job; exposure to temperature extremes, cuts/punctures, and bloodborne/airborne pathogens. Able to work in hot, wet areas and wear personal protective clothing. Shift Monday – Friday; 7:00 am – 3:30 pm (40 hours per week); This position is required to participate in weekend, after hours, holiday and on-call rotations. Mandatory overtime may be required to meet staffing needs. Job Summary Completes primarily simple and routine animal caretaking duties for mice (and other rodents), non-human primates, pigeons, dogs and other animal species. As requested by Supervisor completes facility care including cage wash and animal care activities which may occur up to 70% of the time of overall job duties and responsibilities. Staff will be trained in all facilities and will be rotated on a regular basis through all facilities for scheduled shifts and/or to meet staffing needs. All actions are completed by strictly and consistently following applicable DLAR SOPs including safety procedures and guidelines. Reports any suspected or actual deviations to SOPs or non-routine situations immediately to Supervisor or Team Lead. Arrives, leaves and takes breaks at work as scheduled. Strictly adheres to DLAR attendance policy. IEBC (Internal Employee Being Considered). Skills / Knowledge / Abilities MS Windows, Word, and Outlook. Does this position have supervisory responsibilities? No Preferred Education/Experience Minimum of four months of satisfactory work in a laboratory animal facility or 1 year experience in an animal related field; Valid state driver’s license; Completion of PMI Laboratory Animal Care" course. Deadline to Apply 02/10/2025 Our University Community We value the well-being of each of our employees and are dedicated to creating a healthy place for everyone to work, learn and live. In the interest of maintaining a safe and healthy environment for our students, employees, patients and visitors the University of Kentucky is a Tobacco &amp; Drug Free campus. As an Equal Opportunity Employer, we strongly encourage veterans, individuals with disabilities, women, and all minorities to consider our employment opportunities. Any candidate offered a position may be required to pass pre-employment screenings as mandated by University of Kentucky Human Resources. These screenings may include a national background check and/or drug screen.

1,200 Technician Jobs